Votes - 4, Average rating: 4
(
)
)
|
manual abstract
Unplug the power lead before moving the TV. Avoid uneven surfaces, quick steps or excessive force. If the set has been dropped or damaged, have it checked immediately by qualified service personnel. 1 !. !• !¶ !§ !. !. !. !™ 1!. !• !¶ !§ !. !. !. !™ Overview of Remote Control Buttons 1To Temporarily Switch Off TV: Press this button to temporarily switch off TV (the standby indicator on the TV lights up). Press again to switch on TV from standby mode. To save energy we recommend switching off completely when TV is not in use. 2 After 15 minutes without a signal and without any button being pressed, the TV switches automatically into standby mode. 3 2Selecting input source: Press this button repeatedly until the desired4 input symbol of the source appears on the TV screen. 53Selecting channels: If Media Selector is switched to TV or VCR, press this button to select 6 channels. For double-digit programme numbers, enter the second digit within 2.5 7 seconds. 84a) If Media Selector is switched to TV: 9 Press this button to watch the last channel selected (the last channel watched for at least 5 seconds). !. b) If Media Selector is switched to VCR: For Sony’s VCR double-digit programme numbers, e.g. 23, press -/- !. first and then the buttons 2 and 3. 5This button only works in Teletext mode. 6Selecting screen format: Press this button repeatedly to change the format of the screen. For more details refer to chapter “Auto Format” on page 14. 7Selecting Teletext: Press this button to switch on teletext. 8 a) If Media Selector is switched to TV: • When MENU is switched on, use these buttons to operate the menu system. For details refer to “Introducing and Using the Menu System” GB on page 9. • When MENU is switched off, press OK to show a channel overview. Then press or to select the channel and then press again the OK button to watch the selected channel. b)If Media Selector is switched to VCR or DVD: Using these buttons you can control the main functions of your VCR or DVD. 9Recording button: If Media Selector is switched to VCR, press this button to record programmes. !.Media Selector: With this remote control you can operate not only this TV but also the main functions of your VCR or DVD. Switch on the device you want to operate and next press this button repeatedly to select the VCR, TV or DVD. A green light will be momentarily lit to indicate the chosen function. Before the first time you want to control a DVD or VCR by using this remote control, you have to set it up depending on the brand of the device to be used. For more details, refer to chapter “Remote Control Configuration for VCR or DVD” on page 20. !.Selecting channels: Press this button to select the next or previous broadcast channel. !™Muting the Sound: Press this button to mute TV sound. Press again to restore the sound. !.Adjusting TV volume: Press this button to adjust the volume of the TV. !.Displaying the menu system: Press this button to display the menu on the TV screen. Press again to remove the menu display from the TV screen. !.Selecting TV mode: Press this button to switch off teletext or video input. !§Selecting Sound effect: Press this button repeatedly to change the sound effect. !¶Selecting Picture mode: Press this button repeatedly to change the picture mode. !•Displaying on Screen information: Press this button to display all on-screen indications. Press again to cancel. !.VCR or DVD on/off: Press this button to switch your VCR or DVD on or off. Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details, please refer to “Teletext” section of this instruction manual. 5 Overview Overview of TV Buttons Inserting Batteries into the Remote Control Make sure you insert the supplied batteries using the correct polarities. Always remember to dispose of used batteries in an environmental friendly way. Connecting the Aerial and VCR On/Off switch Standby indicator Press on the mark on the door flap to reveal the control panel. Programme Up or Down Buttons (Selects TV channels) Selecting Input source Audio Input jacks Volume control buttons Auto Start Up Button Headphones jack Video Input jack S video Input jack Connecting cables are not supplied. or Scart lead is optional. For more details of VCR connection, please refer to the section “Connecting Optional Equipment” of this instruction manual. VCR OUT IN Overview-Installation Switching On the TV and Automatically Tuning The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen, 2) adjust the picture slant, 3) search and store all available channels (TV Broadcast) and 4) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in the (Set Up menu) or by pressing the Auto Start Up Button on the TV set. 1 Connec...
Other models in this manual:Televisions - KV-28LS60U (2.77 mb)