Votes - 4, Average rating: 4.3 ( )

Manafacture: Sony File size: 6.6 mb File name: Language of manual:

Photos and specs  Sony  KDL-40E4000

26 Analogue Set-up .......................................................................................................... 28 Digital Set-up ....................................................................................................... 30 Photo ................................................................................................................................. 32 Picture Frame ............................................................................................................... 32 USB Photo Viewer ....................................................................................................... 32 Additional Information Specifications ..................................................................................................................... 33 Troubleshooting .................................................................................................................36 : for digital channels only Before operating the TV, please read the “Safety information” section of this manual. Retain this manual for future reference. 3 GB Start-up Guide 1: Checking the accessories Mains lead (1) (only for KDL-52W4xxx, KDL46W4xxx, KDL-40W4xxx, KDL-40E4xxx) Remote RM-ED011 (1) Remote RM-ED011 W (1) (only for KDL40E4xxx, KDL-32E4xxx, KDL-26E4xxx) Size AA batteries (R6 type) (2) Stand (1) (except for KDL-52W4xxx, KDL-26E4xxx) Screws for stand (4) (only for KDL46W4xxx, KDL-40W4xxx, KDL-40E4xxx, KDL-37V4xxx) Screws for stand (3) (only for KDL32W4xxx, KDL-32E4xxx, KDL-32V4xxx, KDL-26V4xxx) To insert batteries into the remote Push and lift the cover to open. 2: Attaching the stand (except for KDL-52W4xxx, KDL-26E4xxx) 1 Open the carton box and take out the stand and the screws. 4 GB 5 GB Start-up Guide 2 Place the TV set on the stand. Take care not to interfere with cables. 3 Fix the stand to the TV using the supplied screws. ~ If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 kgf·cm) 3: Connecting an aerial/VCR/ DVD recorder KDL-46W4xxx KDL-40W4xxx KDL-40E4xxx KDL-37V4xxx KDL-32W4xxx KDL-32E4xxx KDL-32V4xxx KDL-26V4xxx Connecting an aerial/cable Connecting an aerial/ cable/ VCR/ DVD recorder Coaxial cable Scart lead VCR/ DVD recorder Coaxial cable Coaxial cable Terrestrial signal or cable Terrestrial signal or cable 6 GB 4: Preventing the TV from toppling over 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2 Install a machine screw (M6 x 12, not supplied) into the screw hole of the TV. 3 Tie the wood screw and the machine screw with a strong cord. 5: Connecting the cables 6: Bundling the cables 7: Performing the initial set-up 1 Connect the TV to your mains socket (220-240V AC, 50Hz). 2 Press 1 on the TV. When you switch on the TV for the first time, the Language menu appears on the screen. 3 Press F/f/G/g to select the language displayed on the menu screens, then press . KDL-52W4xxx KDL-46W4xxx KDL-40W4xxx KDL-40E4xxx 3,4,5 GUIDE Cesky Magyar Русский ББлгарски Suomi Dansk Svenska Norsk Slovencina Romana English Nederlands Francais Italiano Deutsch Turkce Espanol Catala Portugues Polski Language Set Back Analogue 4 Press F/f to select the country/region in which you will operate the TV, then press . Back Set Analogue United Kingdom Ireland Nederland Belgie/Belgique Luxembourg France Italia - Country Select country If the country/region in which you want to use the TV does not appear in the list, select “-” instead of a country/region. 5 Press F/f to select the location type in which you will operate the TV, then press . ~ Sony recommends you to select “Home” for power saving. Back Set AnalogueLocation Home Shop Select location This option selects the initial picture mode appropriate for the typical lighting condition in these enviroments. 8: Auto-tuning the TV 1 Select OK then press . Back Set AnalogueAuto Tuning OK Cancel Do you want to start Auto Tuning? 2 Press F/f to select “Antenna” or “Cable”, then press . If you select “Cable”, the screen for selecting the scan type appears. See “To tune the TV for Cable connection” (page 8). The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, so do not press any buttons on the TV or remote while proceeding. If a message appears for you to confirm the aerial connection No digital or analogue channels were found. Check all the aerial/cable connection and then press to start auto-tuning again. 3 When the Programme Sorting menu appears on the screen, follow the steps of “Programme Sorting”(page 28). If you do not change the order in which the analogue channels are stored on the TV, press RETURN to go to step 4. 4 Back Set AnalogueQuick Start Yes No Do you want to enable Qu ck Start? TV turns on more quickly but standby power consumption is increased. For details, see page 24. 5 Back Set AnalogueControl for HDMI Yes No Do you want to enable control for compatible HDM dev ces? For details, see page 1...

Download now

Please, enter two numbers from picture: