Votes - 3, Average rating: 3.3 ( )

Manafacture: Sony File size: 4.94 mb File name: Language of manual:

Photos and specs  Sony  KDL-46D3550

4 Press G/g to select “Yes”, then press to confirm. Watching TV 17 GB Using Optional Equipment Connecting optional equipment You can connect a wide range of optional equipment to your TV. 6 For service use only Camcorder Headphones DVD player with component output Hi-Fi audio equipment DVD recorder Decoder VCR Video game equipment DVD player Decoder PCAudio system PC (HDMI output) Blu-ray disc player DVD player CAM Card Camcorder 18 GB Sockets Input symbol on Description screen A HDMI IN 4 or 5 AV4 or AV5 Connect to the HDMI IN 4 or 5 socket if the equipment has a HDMI socket. The digital video and audio signals are input from the equipment. In addition, when HDMI control compatible equipment is connected, communication with the connected equipment is supported. Refer to page 30 to set up this communication. If the equipment has a DVI socket, connect the DVI socket to the HDMI IN 5 socket through a DVI - HDMI adaptor interface (not supplied), and connect the equipment’s audio out sockets to the audio in the HDMI IN 5 sockets. ~ • The HDMI sockets only support the following video inputs: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p and 1080/24p. • Be sure to use only an HDMI cable that bears the HDMI logo. B PC / PC Connect to the PC / PC cable with ferrites. socket. It is recommended to use a C / 3 AV3 Connect to the component video sockets and the audio sockets / 3. D Connect to the audio output sockets to listen to the sound from the TV on Hi-Fi audio equipment. E / 1 AV1 or AV1 Connect to the scart / 1 socket. When you connect the decoder, the scrambled signal from the TV tuner is output to the decoder, then the unscrambled signal is output from the decoder. F / 2 AV2 or AV2 Connect to the scart / 2 socket. SmartLink is a direct link between the TV and a VCR/DVD recorder. G Headphones Connect to the i socket to listen to sound from the TV on headphones. H 6 6 or 6, and AV6 or AV6 Connect to the S video 6 socket or the composite video 6 socket, and the audio 6 sockets. To avoid picture noise, do not connect the camcorder to the video 6 socket and the S video 6 socket at the same time. If you connect mono equipment, connect to the 6 L socket. Using Optional Equipment I CAM (Conditional Access Module) To use pay TV services. For details, refer to the instruction manual supplied with your CAM. To use the CAM, remove the “dummy” card from the CAM slot. Turn off the TV when inserting your CAM into the CAM slot. When you do not use the CAM, we recommend that the “dummy” card be inserted and kept in the CAM slot. ~ CAM is not supported in some countries/regions. Check with your authorized dealer. 19 GB Viewing pictures from the connected equipment Turn on the connected equipment, then perform one of the following operation. For equipment connected to the scart sockets using a fully-wired 21-pin scart lead (page 18) Start playback on the connected equipment. The picture from the connected equipment appears on the screen. For an auto-tuned VCR (page 6) In analogue mode, press PROG +/-, or the number buttons, to select the video channel. For other connected equipment (page 18) Press / to display the connected equipment list. Press F/f to select the desired input source, then press . (The highlighted item is selected if 2 seconds pass without any operation after pressing F/f.) When the input source is set to “Skip” in the “AV Preset” menu under the “AV Set-up” menu (page 29), that input does not appear in the list. Additional operations To Do this Return to normal TV Press DIGITAL or ANALOG. mode Access the Input signal Press to access the Input index table (except TV signal index table. To select an mode) input source, press F/f, then press . Change the volume of Press 2 +/-. the connected HDMI control compatible audio system Mute the sound of the Press %. connected HDMI Press again to restore. control compatible audio system Using the Tools menu Press TOOLS to display the following options when viewing pictures from connected equipment. Options Description Close Closes the Tools menu. Picture Mode (except PC input mode) See page 23. Display Mode (in PC input mode only) See page 23. Sound Mode See page 25. Speaker See page 29. PAP (except PC input mode) See page 20. PIP (in PC input mode only) See page 21. Auto Adjustment (in PC input mode only) See page 32. Horizontal Shift (in PC input mode only) See page 32. Vertical Shift (in PC input mode only) See page 32. i Volume Adjusts the volume of the headphones. Sleep Timer (except PC input mode) See page 30. Power Saving See page 30. Auto Clock Set Allows you to switch to digital mode and obtain the time. To view two pictures simultaneously – PAP (Picture and Picture) You can view two pictures (external input and TV programme) on the screen simultaneously. Connect the optional equipment (page 18), and make sure that images from the equipment appear on the screen (page 20). ~ • This function is not available for a PC input source. • You cannot change the size of the pict...

Download now

Please, enter two numbers from picture: