Votes - 2, Average rating: 4
(
)
)
|
Photos and specs Sony KDL-40S3000 |
manual abstract
For equipment connected to the scart sockets using a fully-wired 21-pin scart lead Start playback on the connected equipment. The picture from the connected equipment appears on the screen. For an auto-tuned VCR (page 6) In analogue mode, press PROG +/-, or the number buttons, to select the video channel. For other connected equipment Press / repeatedly until the desired input source (see below) appears on the screen. Symbol on the Description screen AV1/ AV1 To see the equipment connected to J. AV2/ AV2 To see the equipment connected to K. ~ SmartLink is a direct link between the TV and a VCR/DVD recorder. AV3 To see the equipment connected to I. AV4 HDMI IN 4*. To see the equipment connected to F. AV5 HDMI IN 5*. To see the equipment connected to E. If the equipment has a DVI socket, connect the DVI socket to the HDMI IN socket through a DVI-HDMI adaptor interface (not supplied), and connect the equipment’s audio out sockets to the audio in HDMI IN sockets. AV7 HDMI IN 7*. To see the equipment connected to C. * ~ • Be sure to use only an HDMI cable that bears the HDMI logo. • When HDMI control compatible equipment is connected, communication with the connected equipment is supported. Refer to page 18 to set up this communication. • When connecting an audio system with HDMI socket, be sure to also connect to the HiFi socket. Symbol on the Description screen AV6 or AV6 To see the equipment connected to B. z To avoid picture noise, do not connect the camcorder to the video socket 6 and the S video socket 6 at the same time. If you connect mono equipment, connect to the L socket 6. PC To see the equipment connected to G. z It is recommended to use a PC cable with ferrites. To connect Do this Headphones A Connect to the i socket to listen to sound from the TV on headphones. Conditional To use Pay Per View services. Access Module For details, refer to the instruction (CAM) D manual supplied with your CAM. To use the CAM, remove the rubber cover from the CAM slot. Switch off the TV when inserting your CAM into the CAM slot. When you do not use the CAM, we recommend that you replace the cover on the CAM slot. ~ CAM is not supported in all countries. Please check with your authorized dealer. Hi-Fi audio Connect to the audio output sockets equipment H to listen to the sound from the TV on Hi-Fi audio equipment. Additional operations To Do this Return to normal TV Press DIGITAL or ANALOG. mode Access the Input Press to access the Input signal index table signal index table. To select an (except analog mode) input source, press F/f, then press . Change the volume of Press 2 +/-. the connected HDMI control compatible audio system Mute the sound of the Press %. connected HDMI Press again to restore. control compatible audio system Using Optional Continued 17 GB Using the Tools menu Press TOOLS to display the following options when viewing pictures from connected equipment. Options Description Close Closes the Tools menu. Picture Mode (except PC input mode) See page 20. Display Mode (in PC input mode only) See page 20. Sound Effect See page 22. Speaker See page 23. PIP (in PC input mode only) See page 18. H Centre (in PC input mode only) See page 25. V Lines (in PC input mode only) See page 25. Sleep Timer (except PC input mode) See page 25. Power Saving See page 24. To view two pictures simultaneously – PIP (Picture in Picture) You can view two pictures (PC input and TV programme) on the screen simultaneously. Connect a PC (page 16), and make sure that images from a PC appear on the screen. ~ You cannot display resolutions higher than WXGA (1280 . 768 pixels). 1 Press TOOLS to display the Tools menu. 2 Press F/f to select “PIP”, then press . The picture from the connected PC is displayed with full size and the TV programme is displayed on the right corner. You can use F/f/G/g to move the TV programme screen position. 3 Press number buttons or PROG +/- to select the TV channel. To return to single picture mode Press RETURN. z You can switch the audible picture by selecting “PC Sound/ TV Sound” from the Tools menu. Using HDMI control The HDMI control function allows equipment to control each other using HDMI CEC (Consumer Electronics Control) specified by HDMI. You can perform interlocked control operations between Sony HDMI control compatible equipment such as a TV, DVD recorder with hard disk and audio system by connecting the equipment with HDMI cables. Be sure to correctly connect and set the compatible equipment to use the HDMI control function. To connect the HDMI control compatible equipment Connect the compatible equipment and the TV with an HDMI cable. When connecting an audio system, in addition to the HDMI cable, be sure to also connect the audio output socket of the TV and the audio system. For details, see page 16. To make the HDMI control settings HDMI control must be set on both the TV side and the connected equipment side. See HDMI Set-up (page 27) for the TV side settings. See the operating instructions ...
Other models in this manual:Televisions - KDL-32D2710 (5.78 mb)
Televisions - KDL-40D2710 (5.78 mb)
Televisions - KDL-40S3010 (5.78 mb)
Televisions - KDL-32S3000 (5.78 mb)