Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Looking at the laser beam may damage your vision. Headphone connection (Except for 42/50PT25**, 50/60PV25**, 42/50PT35**, 50PV35**, 50/60PZ25**, 42/50PW45**, 50/60PZ55**, 42/50PT45**) Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown on the following illustration. Connecting to a USB Connect a USB storage device such as s USB flash memory, external hard drive or a USB memory card reader to the TV and access the My media menu to use various multimedia files. See “Connecting USB storage devices” on p.55 and see “Browsing files” on p.56 . or Connecting to a CI Module View the encrypted (pay) services in digital TV mode. See p.38. NOTE yyAUDIO menu items are disabled when connecting a headphone. yyWhen changing AV MODE with a headphone connected, the change is applied to video but not to audio. yyOptical Digital Audio Out is not available when connecting a headphone. yyHeadphone impedance: 16 . yyMax audio output of headphone: 10 mW to 15 mW yyHeadphone jack size: 0.35 cm Check this point as shown and insert the CI Module. NOTE yyCheck if the CI module is inserted into the PCMCIA card slotin the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. No. Description 1 Displays the previously viewed TV channel. 2 Plays discs. When multiple discs are available, the title of the disc appears at the bottom of the screen. 3 Controls the connected VCR. 4 HDD recordings playback: Controls the recording stored in HDD. 5 Audio out to home theater speaker or Audio out to TV: Changes the audio output between Home theater speaker and TV speaker. SIMPLINK connection Use the TV remote control to play and control the AV device connected with the HDMI cable through HDMI-CEC. Your TV only works with the devices that support HDMI-CEC. Connect one end of the HDMI cable to the HDMI/ DVI IN or HDMI IN terminal on the rear of the TV and the other end to the SIMPLINK device. In wireless external output, SIMPLINK function is not supported. - A check mark appears in front of the selected device. - Available devices display in a bright colour. - Unavailable devices display in grey. NOTE yyIf the connected device does not support HDMI-CEC, the SIMPLINK feature is unavailable. yyTo operate SIMPLINK, an High Speed HDMI Cable with *CEC function should be used. (*CEC: Consumer Electronics Control). 4 Control the selected AV device. - Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. - Select AV device: Enables you to select one of the AV devices connected to the TV. - Disc playback: Control connected AV devices by pressing the Navigation buttons, OK, and buttons. - Power off all devices: When you power off the TV, all connected devices are turned off. - Switch audio-out: Offers an easy way to switch audio-out. - Sync Power on: When the equipment with SIMPLINK function connected HDMI terminal starts to play, The TV will automatically turn on. Activating the SIMPLINK feature 1 Press SIMPINK to access the SIMPLINK menus. 2 Press the Navigation buttons to scroll to On. 3 Press the Navigation buttons to scroll to one of the devices and press OK. NOTE yyImage shown may differ from your TV. yyIf you change the input source by pressing INPUT, the progressing function of the SIMPLINK device will stop. yyIf you select a device that has the home theater feature, the sound output automatically switches to the home theater speaker and the TV speaker turns off. yyIf a connected SIMPLINK home theater system does not play the audio from the TV, connect the DIGITAL AUDIO OUT terminal on the rear of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with an optical cable. Exit OK < On > Watch TV Selected Device 1 DISC When a device is connected (displayed in bright colour) 2 VCR 3 VCR HDD Recorder 4 When device is not connected (displayed in gray) Speaker TV Speaker > < 5 TELETEXT 90 ENG ENGLISH TELETEXT Top Text The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. yyThis feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-theminute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information. Block / Group / Page Selection 1 With the blue button you can progress from block to block. 2 Use the yellow button to proceed to the next group with automatic overflow to the next block. 3 With the green butt...
Other models in this manual:Televisions - 50PZ250 (10.7 mb)