Votes - 3, Average rating: 4.7
(
)
)
|
Other manuals for this model:
manual abstract
Auto Start-up You can run the initial Set-up that appeared when you first connected the TV, and select the language and country/area, or tune in all available channels again. Even if you have made the settings when you first connected the TV, you may need to change the settings after moving house, or to search for newly launched channels. Language Sets the language displayed on the menu screens. Product Information Displays product information of the TV. Factory Settings Resets all settings to factory settings except for the "Favourite" settings and programme preset data. After completing this process, the initial set-up screen is displayed. Completing auto tuning in initial set-up will reset the settings 93/119 Set-up that are not reset by "Factory Settings". To retain the settings, skip the "Auto Tuning". 94/119 Analogue Set-up Programme List Display Select “Off” to hide the list of analogue channels from the XMB™ (XrossMediaBar). 1 Digit Direct When “1 Digit Direct” is set to “On”, you can select an analogue channel using one preset number button (0 – 9) on the remote. • When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above by entering two digits on the remote. Favourite Set-up Adds channels in a Favourite list. To reset the favourite channels, select “– – –”. Auto Tuning Tunes in all the available analogue channels. You can retune the TV after moving house, or to search for newly launched channels. 95/119 Analogue Set-up Programme Sorting Changes the order of analogue channels stored in the TV. 1 Press to select the channel you want to move to a new position, then press . 2 Press to select the new position for the channel, then press . Programme Labels Assigns a channel name of your choice, up to five letters or numbers. The name appears briefly on the screen when you select the channel. (Names for channels are usually taken automatically from Text (if available).) 1 Press to select the channel you want to name, then press . 2 Press to select the desired letter or number (“_” for a blank space), then press . If you enter a wrong character: Press to select the wrong character. Then, press to select the correct character. 3 Repeat step 2 until you finish entering the name. 96/119 Analogue Set-up 4 Press to exit the labeling procedure. Intelligent Picture • On with Indicator: Automatically reduces the picture noise. The signal level bar is displayed when the channel is changed or the display is changed from an input screen to a TV programme. • On: Automatically reduces the picture noise. • Off: Turns off the “Intelligent Picture” feature. Manual Programme Preset To preset a channel, press PROG +/– to select the programme number, before selecting “Label”, “AFT”, “Audio Filter”, “Skip”, “Decoder”, or “LNA”. You cannot select a programme number that is set to “Skip” (99). • Programme/System/Channel: Allows you to preset programme channels manually. 1 Press to select “Programme”, then press . 2 Press to select the prog...
Other models in this manual:Televisions - KDL-22E5300 (12 mb)
Televisions - KDL-22E5310 (12 mb)
Televisions - KDL-32E5500 (12 mb)
Televisions - KDL-32E5510 (12 mb)