Votes - 0, Average rating: 0 ( )

Manafacture: Philips File size: 6.27 mb File name: Language of manual:

•When using the Component Video connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors are connected to their corresponding colored jacks on the unit. WhenIenterachannelnumber, itchangesautomatically. •Many Digital channels have alternate channel numbers. The unit changes the numbers automatically to the ones signifying the broadcasting station channel number. These basic numbers used for previous Analog broadcasts. (e.g., Input ch# 30 automatically changes to ch# 6.1) Whyarecaptionsnotdisplayedentirely?Or,captionsaredelayedbehindthedialog. •Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts. Most captioning production companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective editing is used to insure that the captions remain up-to date with the current TV screen dialog. HowcanIsettheclock? •There is no clock function on this unit. IcannotchangetheChildlocksettingbecausemyPINcodenolongerworks. •If a Power failure occurs for longer than 10 seconds the child lock setting is retained, but the PIN code is reset to the default code 0000. Refer to Childandratingslock. . p.23 Troubleshooting If the unit does not perform properly when operated as instructed in this User Manual, check the following chart and all connections once before calling for service. SymptomRemedy No power • Make sure the AC power cord is plugged in. • Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into the AC outlet to ensure that the AC outlet operates normally. • If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit to reset itself. Control buttons do not work. • Press only one button at a time. Do NOT press more than one button at the same time. • Ensure that no buttons on the remote control are depressed and move freely. Continued on next page. 34 English SymptomRemedy Power is ON but no screen • Check whether the connection of the antenna, cable receiver or satellite box is connected correctly. image. • Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu-ray disc / DVD recorder. • Make sure that the selected Input mode is connected to the working Input jack. • Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode. Tap any key on the keyboard to wake up your computer. No picture or sound • Check if the Power is on. • Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu-ray / DVD recorder. • View other TV channels. The problem might be limited to the broadcasting station or weak signal strength. • Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord and Turn On the unit again. • Check whether the connection of the antenna, cable receiver or satellite box is connected correctly. • Make sure that the selected Input mode is connected to the working Input jack. • Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode. Tap any key on the keyboard to wake up your computer. • Make sure that the sound is not muted. Press MUTE so that the volume bar and current volume level will appear on the TV screen. • Make sure that the volume is NOT set to 0 or . If so, use VOL + / . to adjust to the desired volume. No color • View other TV channels. The problem might be limited to the broadcasting station or weak signal strength. • Adjust Color in Picture settings. . p.19 No sound, distor ted sound or incorrect Audio Sound is heard when using the HDMI-DVI connections. • Make sure that the Analog Audio signals from the HDMI-DVI device are connected to the Analog Audio (L/R) Input jacks. • When using Component Analog Video, Composite Analog Video or PC VGA Video make sure that the Analog Audio (L/R) connectors are mounted into the Audio (L/R) Input jacks. Adjusted Picture or Sound settings are not effective ever y time the unit is Turned On. • You must set Home in Location. . p.27 Otherwise, the settings you adjusted will not be memorized after the unit goes into Standby mode. Sound OK, picture poor • Electrical interference from nearby appliances may affect picture quality. • Adjust Contrast and Brightness in Picture settings. . p.19 • View other TV channels. The problem might be limited to the broadcasting station or weak signal strength. • For the best picture quality, watch High Definition wide screen programs. If the HD content is not available, watch Standard Definition programs instead. Picture OK, sound poor • View other TV channels. The problem might be limited to the broadcasting station or weak signal strength. • Check if the audio cable is connected into the unit correctly. You see a distor ted picture or hear an unusual sound. • You may be getting interference from electrical appliances, automobiles, motorcycles or fluorescent lights. • Tr y moving the uni...

Download now

Please, enter two numbers from picture: