Votes - 1, Average rating: 3
(
)
)
|
manual abstract
• [Hue]: Compensates for colour variations. • [Sharpness]: Adjusts sharpness in the image. • [Noise reduction]: Filters and reduces noise in an image. • [Tint]: Adjusts the colour balance in an image. • [Custom tint]: Customises tint setting. (Only available if [Tint] > [Custom] is selected) EN • [Digital Crystal Clear]: Fine-tunes each pixel to match surrounding pixels. This produces a brilliant, high-definition image. • [Dynamic contrast]: Enhances contrast. A [Medium] setting is recommended. • [Dynamic backlight]: Adjusts brightness of the TV backlight to match lighting conditions. • [MPEG artifact reduction]: Smoothes out transitions on digital pictures. You can switch this feature on or off. • [Colour enhancement]: Makes colours more vivid and improves the details in bright colours. You can switch this feature on or off. • [PC mode]: Adjusts the picture when a PC is connected to the TV via HDMI or DVI. • [Picture format]: Changes the picture format. • [Picture size]: Adjusts the viewing area. (When set to maximum, you might see noise or a rough edge of an image.) • [Horizontal shift]: Adjusts the picture horizontally for PC-VGA, DVI, HDMI or YPbPr. • [Vertical shift]: Adjusts the picture vertically for PC-VGA, DVI, HDMI or YPbPr. Change picture format 1 Press FORMAT. »»A picture format bar appears. 2 Press to select a picture format. »»The selected picture format is activated. 3 Press OK to confirm your choice. Summary of picture formats The following picture settings can be configured. Note ••Depending on the format of the picture source, some picture settings are not available. EN [Auto format]: (Not for PC mode.) Automatically displays the suitable picture format. If not, widescreen is applied. [Super zoom]: (Not for HD and PC mode.) Removes the black bars on the side of 4:3 broadcasts. There is minimal distortion. [4:3]: Shows the classic 4:3 format. [Subtitle zoom]: Displays 4:3 pictures over the full area of the screen, with sub-titles visible. Part of the top of the picture is clipped off. [Movie expand 14:9]: (Not for HD and PC mode.) Scales 4:3 format to 14:9. [Movie expand 16:9]: (Not for HD and PC mode.) Scales 4:3 format to 16:9. [Wide screen]: Scales 4:3 format to 16:9. [Unscaled]: For HD and PC mode only, and in selected models only. Allows maximum sharpness. Some distortion may be present due to the broadcaster’s systems. Set your PC resolution to wide screen mode for best results. Use smart sound Use smart sound to apply pre-defined sound settings. 1 Press SOUND. »»The [Smart sound] menu appears. 2 Press to select the following settings. • [Custom]: Applies the settings that were customised in the sound menu. • [Standard]: Adjusts sound settings to suit most environments and types of audio. • [News]: Applies settings for spoken audio, such as news. • [Movie]: Applies settings for movies. 3 Press OK to confirm your choice. »»The selected smart sound setting is applied. EN Manually adjust sound settings 1 Press MENU. 2 Press to select [Setup] > [Sound]. »»The [Sound] menu appears. 3 Press to select the following settings. • [Smart sound]: Accesses pre-defined smart sound settings. • [Bass]: Adjusts the bass level. • [Treble]: Adjusts the treble level. • [Digital audio lipsync]: Enables or disables lipsync audio output. When this is enabled, the TV synchronises the audio and video performance. When disabled, you need to adjust the lipsync audio feature on the external device that is connected to the TV. (Only available with SPDIF connection.) • [Volume]: Adjusts the volume. • [Volume visually impaired]: Sets the mix of visually impaired audio with regular audio. When available, visually impaired audio includes audio descriptions of on- screen action. You can also enable this by pressing AD (Audio Descriptor). (Only applicable for the UK region.) • [Balance]: Adjusts the balance of the right and left speakers. • [Audio language]: Available for digital channels, when multiple languages are broadcast. Lists available audio languages. • [Dual I-II]: Selects audio languages if dual sound broadcast is available. • [Mono/Stereo]: Selects mono or stereo if stereo broadcast is available. • [TV speakers]: Turns TV speakers on or off. (Available only when you switch on Easylink). • [Surround]: Enables spatial sound. • [Headphone volume]: Adjusts headphone volume. • [Auto volume levelling]: Automatically reduces sudden volume changes, for example, when switching channels. • [Delta volume]: Levels out volume differences between channels or connected devices. Switch to the connected device before you change the delta volume. • [SPDIF OUT]: Selects the type of digital audio output. • [PCM]: Converts non-PCM audio to PCM audio. • [Multichannel]: Outputs audio to the home theater. EN Use the universal access menu You can activate the universal access menu during the first installation. Once enabled, you can quickly access the visually impaired and hearing impaired menus when watching TV or external devices...