Votes - 0, Average rating: 0 ( )

Manafacture: Philips File size: 742.87 kb File name: Language of manual:

28 EN gSERV. U For use by ser vice personnel only. Side connectors 1 2 6 3 4 5 English b Stereo audio output to headphones or earphones. c AUDIO L/R Audio input from analogue devices connected to VIDEO. dVIDEO Composite video input from analogue devices such as VCRs. e S-VIDEO a USB Data input from USB storage devices. S-Video (side) to be used with Audio L /R connectors for camcorder, game console, etc. When you use the S-Video (side) for video signals, do not use the Composite video (side) input for video signals. EN 29 • DVI-HDMI cable Connect a computer Before you connect a computer to the TV • Set the screen refresh rate on your computer to 60Hz. • Select a suppor ted screen resolution on your computer. Connect a computer with one of the following connectors: Note • Connections via DVI or VGA require an additional audio cable. • HDMI cable f HDMI Digital audio and video input from high- definition digital devices such as Blu-ray players. • HDMI cable and HDMI-DVI adaptor DVI LEFT / RIGHT HDMI 1/ DVI AUDIO IN : PC IN(AUDIO) For TV of size 26 inch and larger For TV of size 22 inch and smaller HDMI 2/ DVI / HDMI 2 VGA • VGA cable DVI / HDMI 2 LEFT / RIGHT HDMI 1/ DVI AUDIO IN : PC IN(AUDIO) For TV of size 26 inch and larger HDMI 2/ DVI VGA For TV of size 22 inch and smaller VGA VGA LEFT / RIGHT HDMI 1/ DVI AUDIO IN : PC IN(AUDIO) For TV of size 26 inch and larger HDMI 2/ DVI VGA For TV of size 22 inch and smaller 30 EN Use Philips EasyLink Your T V suppor ts Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. Note • The EasyLink-compliant device must be switched on and selected as the source. • Philips does not guarantee 100% interoperability with all HDMI CEC devices. EasyLink features Your TV suppor ts the following Easylink features : • One-touch play:When you connect your T V to devices that suppor t one- touch play, you can control your T V and the devices with one remote control. For example, when you press ‘Play’ on your DVD remote control, your T V automatically switches to the correct channel to show the DVD content. • One-touch standby: When you connect your T V to devices that suppor t standby, you can use your T V remote control to put your T V and all connected HDMI devices in standby mode. • System audio control (One-touch audio): When you connect your T V to HDMI CEC compliant amplifier (such as, a Home theatre system or an AV receiver), your T V can switch automatically to play audio from the connected amplifier. To use one-touch audio, you must map the audio input from the connected amplifier to your T V. You can use the remote control of the connected amplifier or your T V to adjust the volume. • Remote control pass-through (RC key forwarding):RC key for warding allows you to control EasyLink-compliant devices using your T V remote control. • Pixel Plus Link:Overrides the settings of connected devices and uses the settings of the T V. Enable or disable EasyLink Note • Do not enable Philips EasyLink if you do not intend to use it. 1 Press (Home). 2 Press to select [Setup] > [Installation] > [Preferences] > [EasyLink]. 3 Select [On] or [Off ]. Use one-touch play 1 Af ter enabling EasyLink, press play on your device. » The TV automatically switches to the correct source. Use one-touch standby 1 Press and hold Standby on the T V’s or device’s remote control for at least three seconds. » The TV and all connected HDMI devices switch to standby. System audio control When enabled, this feature automatically turns off T V speakers when content from an EasyLink-compliant home theatre system is played. Audio is played only from the amplifier’s speakers such as home theatre system’s speakers or AV receiver. Note • Follow the instructions in the user manual of the connected devices to map the audio input to your T V correctly (see ‘Connect an amplifier’ on page 32). 1 Enable one-touch play and one-touch standby between your Easylink compliant devices by following the instructions in the previous section (see ‘Enable or disable EasyLink ’ on page 31). English EN 31 2 Press (Home). 3 Press to select [Setup] > [Sound] > [TV speakers] > [Auto EasyLink]. » The TV speakers are turned off automatically when content from an Easylink compliant system is detected. 4 Press to select [Setup] > [Sound] > [TV speakers] > [On] to disable system audio control and enable the T V speakers. Note • If you select [TV speakers] > [Off ], the T V speakers are muted. Connect an ampli.er An amplifier such as Home theatre System or AV receiver can be used to play audio from an Easylink compliant device connected to your TV. An amplifier can be connected in the following different ways : • An amplifier with only one HDMI output. Audio can be played by the amplifier from the device or T V. HDMI Device HDMI SPDIF OUT / Analogue Audio HDMI SPDIF OUT/ Analogue audio 12 Amplifier • Ampli...

Download now

Please, enter two numbers from picture: