|
manual abstract
Clean the TV with a dry and soft cloth. Do not use benzine, thinner, or any other chemicals to clean the TV. Do not scratch the picture tube. Do not open the cabinet and the rear cover of the TV as high voltages and other hazards are present inside the TV. Refer servicing and disposal of the TV to qualified personnel. Your TV is recommended for home use only. Do not use the TV in any vehicle or where it may be subject to excessive dust, heat, moisture or vibrations. WARNING (continued) Install the TV on a stable TV stand and floor which can support the TV set weight. Ensure that the TV stand surface is flat and its area is larger than the bottom area of the TV. Do not place any objects on the TV. Do not plug in too many appliances to the same power socket. Do not damage the power cord. Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned off, it is still connected to the AC power source (mains) as long as the power cord is plugged in. Unplug the TV before moving it or if you are not going to use it for several days. C Securing the TV B KV-TG21 only To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. Screw the band to the TV stand and to the provided hole at the rear of your TV. 20 mm 3.8 mm screws clamps band or (1) Put a cord or chain through the clamps. (2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV. Note • Use only the supplied screws. Use of other screws may damage the TV. D TV front and rear panels ! PROGR SELECT 613725849qaqs0TV front panel TV rear panel Button Function 1 ! Turn off or turn on the TV. 2 Remote control sensor. 3 1 Standby indicator. 3 Wake Up indicator. 4 PROGR +/– Select program number. 5 2 +/– * Adjust volume. 6 t Select TV or video input. 7 SELECT Select the desired item. 8 Earphone terminal. 9, qa t Video input terminal. 0 8 Antenna input terminal. qs T Monitor output terminal. * You can also use the 2 +/– buttons on the TV to work as the +/– buttons on the remote. E Connecting optional components Connecting to the video input terminal ( t ) TV front panel Camcorder Audio/Video cable (not supplied) TV rear panel Audio/Video cable (not supplied) VCR Video game equipment Antenna cable (not supplied) Note • Do not connect video equipment to t (video input) at the front and the rear of your TV at the same time; otherwise the picture will not be displayed properly on the screen. Connecting to the monitor output terminal (T) TV rear panel Audio/Video cable (not supplied) VCR Audio system F Troubleshooting If you find any problem while viewing your TV, please check the following guide. If any problem persists, contact your Sony dealer. Symptom Solutions Snowy picture, noisy sound • Check the antenna cable and connection on the TV, VCR and on the wall. • Preset the channel manually again. (See J) • Check the antenna setup. Contact a Sony dealer for advice. No picture, no sound • Check the power cord, antenna and the VCR connections. • Press ?/1 (power) or ! (main power) to turn on the TV. Good picture, no sound • Press 2 + to increase the volume level. • Press % to cancel the muting. Dotted lines or stripes • Do not use a hair dryer or other equipment near the TV. • Check the antenna setup. Contact a Sony dealer for advice. Double images or “ghosts” • Use the fine tuning ("FINE") function. (See J) • Turn off or disconnect the booster if it is in use. • Check the antenna setup. Contact a Sony dealer for advice. No color • Select the appropriate color system. (See J) • Adjust the color level. (See K) • Check the antenna setup. Contact a Sony dealer for advice. Abnormal color patches • Keep external speakers or other electrical equipment away from the TV. Press ! (main power) to turn off the TV for about 15 minutes, then turn it on again to demagnetize the TV. The 1 (standby) indicator on your TV flashes red several times after every three seconds. • Count the number of times the 1 (standby) indicator flashes. Press ! (main power) to turn off your TV. Contact your nearest Sony service center. TV cabinet creaks. • Changes in room temperature sometimes make the TV cabinet expand or contract, making a noise. This does not indicate a malfunction. A "boom" sound is heard when the TV is turned on. • The TV's demagnetizing function is working. This does not indicate a malfunction. G Specifications Power requirements 110-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system B/G Color system PAL, PAL 60, SECAM, NTSC3.58 (AV IN), NTSC4.43 Channel coverage VHF: E2 to E12 UHF: E21 to E69 CATV: S01 to S03, S1 to S41 8 (Antenna) 75-ohm external terminal Audio output (Speaker) 3W + 3W 3W Number of terminal (Video) Input: 2* Output: 1 Phono jacks; 1 Vp-p, 75 ohms (Audio) Input: 2* Output: 1 Phono jacks; 500 mVrms (Earphone) Output: 1 Monaural minijack Picture tube 21 in. 14 in. Tube size (cm) 54 37 Screen size (cm) 51 34 Dimensions (...
Other models in this manual:Televisions - KV-TG21L70 (325.62 kb)