Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
2 Press or to adjust the fine tuning between -15 and +15 and press OK. 3 Highlight the Confirm option and press OK. Then press to select OK and finally press OK to store. D) Skip any unwanted programme numbers when they are selected with the PROG +/–. To do this: 1 Highlight the Programme option, press PROG +/– to select the programme number you want to skip. 2 When the programme you want to skip appears on the screen, select the Skip option and press . 3 Press or to select Yes and press OK. 4 Highlight the Confirm option and press OK. Then press to select OK and finally press OK to store. To cancel this function afterwards, select No instead of Yes in the step above. E) View and record scrambled channels when using a decoder connected to the Scart connectors 3/ or S 4/ either directly or via a VCR. This option is only available depending on the country you have selected in the “Language/Country” menu. To do this: 1 After selecting the Decoder option, press . 2 Press or to select On and press OK. 3 Highlight the Confirm option and press OK. Then press to select OK and finally press OK to store. To cancel this function afterwards, select Off instead of On in above. GB 39 Menu System Timer Select: Set: End:OK MENU Mode : Contrast : Brightness : Colour : Hue : Sharpness : Backlight : NR : Dynamic Picture : Colour Tone : Colour Correction : Gamma Correction : Reset Live 80 0 0 0 0 8 Auto On Cool On High Picture Adjustment m Select: Set: End:OK MENU Sleep Timer : Clock Set : Clock Display : On/Off Timer Auto Shutoff : Off 00:00:00 (Mon) Off On Timer The “Timer” menu allows you to alter the timer adjustments. , Select: Set: Back: OK End: MENU Sleep Timer : Clock Set : Off Clock Display : On/Off Timer Auto Shutoff : Off 00:00:00 (Mon) On Timer Sleep Timer The “Sleep Timer” option allows you to select a time period for the TV to switch itself automatically into the standby mode. To do this: 1 After selecting the option, press . 2 Press or to set the time period delay (max. of 2 hours). Whilst watching the TV, you can press the button on the remote control to display the time remaining. Clock Set The “Clock Set” option allows you to set the current time. The error range of the built-in clock is ± 30 seconds a month. To do this: 1 After selecting the option, press . 2 Press or to set the hour, then press . 3 Press or to set the minute, then press . 4 Press or to set the day of a week. 5 Press OK at the time signal. The clock starts. Clock Display The “Clock Display” option allows you to display the clock on the screen. To do this: 1 After selecting the option, press . 2 Press or to select On, then press OK. • The clock display turns off automatically 5 minutes after it is turned on. • The clock display also turns on or off by pressing on the remote. Menu System On/Off Timer The “On/Off Timer” option allows you to turn the TV on and off automatically at a specified time automatically. To use this function, set the clock in advance (page 40). • If you change the following settings, Off is selected automatically in the Timer option. In this case, select On in the Timer option. – Unplugging the mains lead of the media receiver unit – On Time, Holding Time, Weekly Setting, Repeat, Programme option settings To do this: 1 After selecting the option, press . 2 Highlight Timer and press or to select On, then press . 3 Press or to select On Time, then press . 4 Set the time for the TV to turn on itself automatically. Press or to set the hour, then press . Next press or to set the minutes, then press . 5 Press or to select Holding Time, then press . 6 Press or to select the desired Holding Time. Select the holding time (max. of 5 hours) for the TV to switch itself automatically into the standby mode. 7 Press or to select Weekly Setting, then press . 8 Press or to select the day of the week you wish to set for On/ Off Timer, then press . 9 Press or to select On, then press . 10 Repeat steps 8 and 9 to set any other days of a week. 11 Press or to select Programme, then press . 12 Press or to select the channels (TV Broadcast) that you want to watch at the time of turning on the TV, then press . To turn the TV on and off at a specified time everyday, set Repeat to On after step 2, then go to step 3. To cancel this function afterwards, select Off instead of On in step 2 above. Auto Shutoff The “Auto Shutoff” option allows you to set the TV to change to the standby mode automatically if there is no input signal through the connected equipment. To do this: 1 After selecting the option, press . 2 Press or to select On. Auto Shutoff cannot be set when the TV receives the TV Broadcast signal. GB 41 Menu System Unit Status Select: Set: End:OK MENU Mode : Contrast : Brightness : Colour : Hue : Sharpness : Backlight : NR : Dynamic Picture : Colour Tone : Colour Correction : Gamma Correction : Reset Live 80 0 0 0 0 8 Auto On Cool On High Picture Adjustment m The “Unit Status” menu allows you to check the Model Name and Serial Number of this...