Votes - 0, Average rating: 0
(
)
)
|
manual abstract
~ “Brightness”, “Colour”, “Sharpness” and “Adv. Contrast Enhancer” are not available when “Picture Mode” is set to “Vivid” or when “Display Mode” is set to “text”. 21 GB Using MENU Sound Adjustment menu You can select the options listed below on the Sound menu. To select options in “Settings”, see “Navigating through menus” (page 19). Sound Adjustment Select: Enter: Exit: MENU Sound Effect Treble Bass Balance Reset Dual Sound Auto Volume Speaker Standard 0 0 0 Mono On TV Speaker Back: Sound Effect Selects the sound mode. “Standard”: Enhances clarity, detail, and sound presence by using “BBE High definition Sound System.” “Dynamic”: Intensifies clarity and sound presence for better intelligibility and musical realism by using the “BBE High definition Sound System.” “BBE ViVA”: BBE ViVA Sound provides musically accurate natural 3D image with Hi-Fi sound. The clarity of the sound is improved by BBE while the width depth and height of sound image are expanded by BBE’s proprietary 3D sound process. BBE ViVA Sound is compatible with all TV programs including news, music, dramas, movies, sports and electronic games. “Dolby Virtual ” : Uses the TV speakers to simulate the surround effect produced by a multi channel system. “Off”: Flat response. Also allows you to store your preferred settings. z • If you set “Auto Volume” to “On”, “Dolby Virtual” changes to “Standard”. • If headphones are connected, “Sound Effect” changes to “Off”. Treble Adjusts higher-pitched sounds. Bass Adjusts lower-pitched sounds. Balance Emphasizes left or right speaker balance. Reset Resets all the sound settings to the factory settings. Dual Sound Selects the sound from the speaker for a stereo or bilingual broadcast. “Stereo”, “Mono”: For a stereo broadcast. “A”/“B”/“Mono”: For a bilingual broadcast, select “A” for sound channel 1, “B” for sound channel 2, or “Mono” for a mono channel, if available. z If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “A” or “B”. Auto Volume Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend to be louder than programmes). 22 GB Speaker Turns on/off the TV’s internal speakers. “TV Speaker”: The TV speakers are turned on in order to listen to the TV’s sound through the TV speakers. “Audio System”: The TV speakers are turned off in order to listen to the TV’s sound only through your external audio equipment connected to the audio output sockets. When connected with an HDMI control compatible equipment, you can turn the connected equipment on interlocked with the TV. This setting must be made after connecting the equipment. ~ “Sound Effect”, “Treble”, “Bass”, “Balance” and “Auto Volume” are not available when “Speaker” is set to “Audio System”. 23 GB Using MENU Features menu You can select the options listed below on the Features menu. To select options in “Settings”, see “Navigating through menus” (page 19). Features Select: Enter: Exit: MENU Screen Power Saving AV2 Output RGB Centre PC Adjustment Timer Standard TV 0 Back: Screen Changes the screen format. “Auto Format”: Automatically changes the screen format according to the broadcast signal. “Screen Format”: For details about the screen format, see page 12 “V-Size”: Adjust the vertical size of the picture when “Screen Format” is set to “Smart”. z • Even if you have selected “On” or “Off” in “Auto Format”, you can always modify the format of the screen by pressing repeatedly. • “Auto Format” is available for PAL and SECAM signals only. Power Saving Selects the power saving mode to reduce the power consumption of the TV. “Standard”: Default settings. “Reduce”: Reduces the power consumption of the TV. “Picture Off”: Switches off the picture. You can listen to the sound with the picture off. AV2 Output Sets a signal to be output through the socket labelled / 2 on the rear of the TV. If you connect a VCR to the / 2 socket, you can then record from the equipment connected to other sockets of the TV. “TV”: Outputs a broadcast. “Auto”: Outputs whatever is being viewed on the screen. Not available for AV3, AV4, AV5 and PC. RGB Centre Adjusts the horizontal picture position so that the picture is in the middle of the screen. z This option is only available if an RGB source has been connected to the Scarts connectors 1/ 1 or 2/ 2 on the rear of the TV. 24 GB PC Adjustment Customizes the TV screen as a PC monitor. z This option is only available if you are in PC Mode. “Phase”: Adjust the screen when a part of a displayed text or image is not clear. “Pitch”: Enlarges or shrinkes the screen size horizontally. “H Centre”: Moves the screen to the left or to the right. “V Lines”: Corrects the picture lines while viewing an RGB input signal from the PC connector. “Power saving”: Turns to standby mode if no PC signal is received. “Reset”: Resets to the factory settings. Timer Sets the timer to turn on/off the TV. Sleep Timer Sets a period of time after which the TV automatically switches itself into standby mode...