|
manual abstract
6. Note: • ”Canadian Ratings” is for Canada area (if available), operation is same as “US Ratings”. • If “RRT5 ” is available on your program provider. You can set “Advanced Rating” to On, and get a item “Advanced Parental Lock”. Press • or , a new menu icon will appear and you can follow menu instruction to set up ratings. To execute "Auto Adjust" is recommend when you input a PC timing every time. The image will be auto adjusting by system internally to get an optimum H/V-Position, Clock and Phase. Chapter 6: Using the TV’s features • H-Position: Moves the picture left/right. The adjustment range is -50~+50 (default value is 0).* • V-Position: Moves the picture up/down. The adjustment range is -10~+10 (default value is 0).* • Clock: Helps to reduce noise and sharpen the picture. The adjustment range is -10~+10 (default value is 0).* • Phase: Helps to reduce noise and minimize periodic vertical stripes on the screen. The adjustment range is -15~+16 (default value is 0).* * The default settings may vary depending on the input signal format. Setting the PC Audio If the INPUT source is set to PC. The PC IN audio phone jack is applied for PC IN when PC IN terminal is connecting with an analog RGB cable. (. page 19) Note: Because the PC Audio input is shared with HDMI 1. If INPUT source is set to “HDMI 1,”And the HDMI 1 signal is DVI format. This PC Audio input will apply for HDMI 1. (Also see item 2 on page 11.) Setting the sleep timer You can set the sleep timer to turn off the TV after a set length of time (maximum of 90 minutes). To set the sleep timer using the remote control: Press on the remote control to set the length of time until the TV turns off. Repeatedly press to increase the time in 30-minute increments, to a maximum of 90 minutes. To set the sleep timer using the on-screen menus: 1 2 3 Press and open the Prefer menu. Highlight Sleep Timer. Press . or to increase the time in 30-minute increments. Off.30 Min.60 Min.90 Min.Off Note: When a power failure occurs, the sleep timer setting may be cleared. To display the remaining sleep timer: Press on the remote control or same as above process using the on-screen menus. To cancel the sleep timer: Repeatedly press until it is set to Off. Chapter 6: Using the TV’s features Setting the time zone To set the time zone: 1 2 3 Press and open the Prefer menu. Highlight Time Zone. Press . or to select Pacific, Alaska, Hawaii, Eastern, Central and Mountain. Pacific.Alaska.Hawaii.Eastern.Central.• Mountain.Pacific Note: After you change the Time Zone setting, when you press , you will see that the program duration has been changed. For more details on , see" To display TV status information using INFO" section on this page. Displaying TV status information To display TV status information using RECALL: Press on the remote control. The following information will display (if applicable): • Current input (Video 1, Video 2, etc.) • Channel number (if in ANT mode) • Channel label (if set) • Digita...
Other models in this manual:Televisions - 26AV500U (5.25 mb)
Televisions - 26AV50U (5.25 mb)
Televisions - 26AV52U (5.25 mb)
Televisions - 32AV500U (5.25 mb)