Votes - 4, Average rating: 2.5
(
)
)
|
manual abstract
INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available. You can use the TV network functions only when the network connection is made. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. CAUTION yyDo not use any unapproved items to ensure the safety and product life span. yyAny damages or injuries by using unapproved items are not covered by the warranty. yySome models have a thin film attached on to the screen and this must not be removed. NOTE yyThe items supplied with your product may vary depending on the model. yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port. ABAB *A <= 10 mm *B <= 18 mm ASSEMBLING AND PREPARING FREEZERATIOL/R SELECTENTERBACKEXITQ.MENUINFOMENUCHVOLPAGEFAV3DMUTE1234567809MARKLISTFLASHBKENERGYSAVINGTVAV MODEINPUT Remote control and batteries (AAA) (See p. 21, 22) Owner’s manual Polishing cloth (Depending on model) Use this to remove dust from the cabinet. Cinema 3D Glasses The number of 3D glasses may differ depending on the model or country. (Only 32/37/42/47/55LM61**, 32/42/47LM58**, 32/37/42LM34**, 47CM96**) Cable holder (Depending on model) (See p. A-5) Power Cord Stand Screws 8 EA, M4 x 20 (See p. A-3, A-4) Desk-mount Screw (Only 32/37LM611*, 32/42/47LM58**, 32/37/42LM34**, 32/37/42/47LS56**) (See p. 18) Desk-mount Cable (Only 42/47/55LM615*) (See p. 18) Bracket Screw 2 EA, M4 x 8 (Only 42/47/55LM615*) (See p. 18) Wall mount inner spacers 4EA (Only 32/37/42/47/55LM61**, 32/42/47LM58**, 32/37/42/47LS56**) (See p. 20) Protection cover (Only 32/37/42LM34**, 47CM96**) (See p. A-4) or Isolator (Depending on model) (See p.14) ASSEMBLING AND PREPARING Stand Body / Stand Base (Only 42/47/55LM615*) (See p. A-3) Stand Body / Stand Base (Only 32/37LM611*, 32/42/47LM58**, 32/37/42/47LS56**) (See p. A-3) Stand Body / Stand Base (Only 32/37/42LM34**, 47CM96**) (See p. A-4) NOTE yyAntenna Isolator Installation Guide --Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. »»If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. --You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mo...
Other models in this manual:Televisions - 32LM3400 (21.73 mb)
Televisions - 32LM340S (21.73 mb)
Televisions - 32LM611S (21.73 mb)
Televisions - 32LS560S (21.73 mb)