Votes - 5, Average rating: 4.2
(
)
)
|
Other manuals for this model:
manual abstract
And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption. yyThe energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available. You can use the TV network functions only when the network connection is made. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. CAUTION yyDo not use any unapproved items to ensure the safety and product life span. yyAny damage or injuries caused by using unapproved items are not covered by the warranty. yySome models have a thin film attached on to the screen and this must not be removed. ASSEMBLING AND PREPARING FREEZERATIOL/R SELECTENTERBACKEXITQ.MENUINFOMENUCHVOLPAGEFAV3DMUTE1234567809MARKLISTFLASHBKENERGYSAVINGTVAV MODEINPUT FREEZERATIOL/R SELECTENTERBACKEXITQ.MENUINFOMENUCHVOLPAGEFAV3DMUTE1234567809MARKLISTFLASHBKENERGYSAVINGTVAV MODEINPUT Remote Control, Batteries (AAA) (See p. 21) Magic Remote Control, Batteries (AA) (Only 50/60PM97**) (See p. 22) Owner’s manual Polishing cloth (Depending on model) Use this to remove dust from the cabinet. Power Cord Power Cord Holder (See p. A-4) Protection Cover (See p. A-4) Ferrite core (Depending on model) (See p. 14) Cable Holder (Depending on model) (See p. A-4) 3D Glasses (AG-S350) (Depending on model) Screw for assembly (Only 42/50PM47**, 50/60PM67**, 50PM68**, 50PM97**) (See p. A-3) Screw for assembly (Only 60PM68**, 60PM97**) (See p. A-3) Stand Body / Stand Base (Only 42/50PM47**, 50/60PM67**) (See p. A-3) Stand Body / Stand Base (Only 50/60PM68**, 50/60PM97**) (See p. A-3) Cable management (Only 50/60PM68**, 50/60PM97**) (See p. A-3) Isolator (Depending on model) (See p. 15) P x 3 x 4 x 4 x 5 M4 x 30 M5 x 16 M4 x 30 M5 x 16 or ASSEMBLING AND PREPARING NOTE yyThe items supplied with your product may vary depending on the model. yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. How to use the ferrite core 1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable. Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV. (Gray) 10 mm(+ / - 5 mm) [to an External device] [to the TV] [Figure 1] [Cross Section of Ferrite Core] 2 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug. (Black) [to the TV] [to a wall plug] [Figure 2] [Cross Section of Ferrite Core] 3 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable once on the ferrite core B and thrice on the ferrite core A. Place the ferrite core close to the TV and an External device. A (Gray) B (Gray) [to an External device] [to the TV] A B A [Cross Section of Ferrite Core] [Figure 3] 4 Use the ferrite core supplied to reduce the effects of electromagnetic interference induced into Component Video Y, Pb , Pr , L and R audio cables. Wind the Component Video Y, Pb , Pr , L and R audio cables on the ferrite core once. Place the ferrite core as close as possible to the TV connecting end of cables. (Black) [to an External device] [to the TV] 10 mm(+ / - 5 mm) [Cross Section of Ferrite Core] [Figure 4] - If there are six ferrite cores, attach as per Figure 1,2 and 3. - If there are seven ferrite cores, attach as per Figure 1,2,3 and 4. yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port. *A 10 mm *B 18 mm NOTE yyAntenna Isolator Installation Guide --Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. »»If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact may get hot and excessive heat might cause an accident. --You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation. --Before starting, be sure that the TV antenna is connected. ANTENNA/ CABLE IN Cable / AntennaWallIsolator1. Connect to TV. 2. Connect to Set-Top box. Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box. “Equipment connected...
Other models in this manual:Televisions - 42PM4700 (15.02 mb)
Televisions - 50PM4700 (15.02 mb)
Televisions - 50PM970S (15.02 mb)
Televisions - 60PM970S (15.02 mb)