Votes - 1, Average rating: 3
(
)
)
|
manual abstract
yySome models have a thin film attached on to the screen and this must not be removed. NOTE yyThe items supplied with your product may vary depending on the model. yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port. ABAB *A <= 10 mm *B <= 18 mm ASSEMBLING AND PREPARING Remote control and batteries (AAA) (See p. 20) Owner’s manual Cable holder (Depending on model) (See p. A-6) Polishing cloth (Depending on model) Use this to remove dust from the cabinet. Adapter (Only 19/22/26LS35**) (See p. B-3) Stand Screw 2EA, P4 x 16 (Only 19/22LS35**) (See p. A-3) Stand Screw 2EA, M4 x 14 (Only 26LS35**) (See p. A-3) Stand Screw 4EA, P4 x 16 4EA, M4 x 14 (Only 32LS35**, 42LS345*) (See p. A-3, A-5) Stand Screw 8EA, M4 x 20 (Only 26/32/42CS46**, 32/42LS340*) (See p. A-4) Stand Screw 2EA, P4 x 16 4EA, M4 x 20 (Only 32LS345*) (See p. A-5) Desk-mount screw (Only 32LS35**, 26/32/42CS46**, 32/42LS34**) (See p. 17) Power Cord Protection cover (Only 26CS46**) (See p. A-7) Protection cover (Only 32CS46**, 32LS340*) (See p. A-7) Protection cover (Only 42CS46**, 42LS340*) (See p. A-7) Protection cover (Only 32LS345*) (See p. A-7) or Isolator (Depending on model) (See p. 13) ASSEMBLING AND PREPARING Stand Body / Stand Base (Only 19/22/26LS35**) (See p. A-3) Stand Body / Stand Base (Only 32LS35**) (See p. A-3) Stand Body / Stand Base (Only 26CS46**) (See p. A-4) Stand Body / Stand Base (Only 32/42CS46**, 32/42LS340*) (See p. A-4) Stand Body / Stand Base (Only 32LS345*) (See p. A-5) Stand Body / Stand Base (Only 42LS345*) (See p. A-5) NOTE yyAntenna Isolator Installation Guide --Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. »»If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. --You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation. --Before starting, be sure that the TV antenna is connected. ANTENNA/ CABLE INCable / AntennaWallIsolator1. Connect to TV. 2. Connect to Set-Top box. or Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box. “Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)” When applying the RF Isolator, a slight loss of signal sensitivity can occur. CAUTION yyPower Cord Installation Guide --If the power cord provided with TV looks like the below picture, please ensure that it is inserted in the right direction. TVPower CordCorrectWrong Parts and buttons B type : 32/42LS345* A type : 19/22/26/32LS35**, 26/32/42CS46**, 32/42LS340* buttons Screen Screen OKINPUTSETTINGSSETTINGSINPUTOK INPUTOKSETTINGS Remote control and intelligent sensors1 Power indicator Speakers Speakers Touch buttons Remote control and intelligent sensors1 Power indicator Buttons Description A type2 B type H H Scroll...
Other models in this manual:Televisions - 22LS3500 (15.62 mb)
Televisions - 26LS3500 (15.62 mb)
Televisions - 32CS460 (15.62 mb)
Televisions - 32LS3400 (15.62 mb)