Votes - 5, Average rating: 4.6
(
)
)
|
Other manuals for this model:
manual abstract
Only a limited number of Internet connections may be available, and TV network setting may not be available depending on your contract with your Internet Service Provider (ISP). (If only one device is allowed per line and the PC is already connected, other devices cannot be used.) ^ If you do not turn off the entire local home network, network traffic may occur on some devices. ^ Invalid settings on network devices can cause the TV to run slowly or not operate properly. Install the devices correctly according to the appropriate manual and set the network. □ To connect DLNA DMP (Digital Media Player) With a PC having Nero MediaHome 4 Essentials, music / video / photo files may be replayed on the TV by linking them via home networking. 1 Configure TV and PC on the same network. The TV and each device should be connected through a single access point to enable DLNA and Media Link service. 2 Install Nero MediaHome 4 on the PC from the website (Before installation, close all running programs including firewall and anti-virus programs. 3 Indicate the files/folders to be shared through Nero MediaHome 4 Essentials installed on the PC. 1. Run “Nero MediaHome 4 Essentials” installed on the PC. 2. Select folder items to share. 3. Configure the shared folder and click "Start Server". Server starts. ^ If the shared folder does not appear on TV, click the Local Folder tab and search again. ^ For more information and software-related information, refer to the website D PC requirements for installing Nero MediaHome 4 Essentials • Windows® XP (Service pack 2 or later), Windows Vista®, Windows® XP Media Center Edition 2005 (Service pack 2 or later), Windows Server® 2003 (Service pack 1 or later) • Windows® 7 Home Premium, Professional, Enterprise or Ultimate (32- and 64-bit) • Windows Vista® 64-bit version (application runs in 32-bit mode) • Windows® 7 64-bit version (application runs in 32-bit mode) • Hard drive space : over 200 MB • CPU : 1.2 GHz Intel® Pentium® III or AMD Sempron™ 2200+ processor • Memory : over 256 MB RAM • Graphics card : above 32 MB, must support resolution of at least 800 x 600 pixels and at least 16-blt colour settings • Windows® Internet Explorer® 6.0 or later • DirectX® 9.0c revision 30 (August 2006) or later • Network environment : 100 MB Ethernet, Wireless LAN WLAN (IEEE 802.11g) or later D In case of a DLNA malfunction ^ If the DLNA feature does not work properly, check your network settings. ^ If you want to view 1080p pictures via DLNA, you will need a 5 GHz access point and may experience broken images or other problems if you use a 2.4-GHz access point. ^ When playing video in DLNA mode, Multi Audio and internal subtitles are not supported. ^ If more than one TV is connected to a single server in DLNA mode, the content may not play depending on server performance. ^ Subtitles may not be supported depending on the DLNA device. ^ DLNA feature may not work properly depending on the network environment. ^ DLNA feature cannot be used with some access points that do not support multicasting. For more information, refer to the access point manual or consult the manufacturer. ^ Supported file types may differ depending on DLNA server environment, even for file types supported by the TV. ^ Too many sub-folders and files in one folder may cause malfunction. ^ The information about the file from the DLNA server may not be displayed correctly. ^ When viewing video subtitles on a DLNA server, we recommend that you use Nero MediaHome 4 Essentials. ^ If subtitle file is added later, turn off the shared folder and reset. ^ DRM file / *.tp file / *trp file / *.mpo file located on a Nero MediaHome 4 Essentials server cannot be played. ^ DRM file located on a Nero MediaHome server cannot be played. Plays content stored on a USB device (external HDD, USB memory stick) directly on the TV, easily and conveniently. □ To connect a USB device Connect the USB storage device to the TV's USB IN terminal. The connected USB storage device can be used immediately. □ To remove the USB device Q.MENU ^ USB Device Select a USB storage device that you want to remove. When you see a message that the USB device has been removed, separate the device from the TV. ^ Once a USB device has been selected for removal, it can no longer be read. Remove the USB storage device and then re-connect it. □ Using a USB storage device - warning ^ If the USB storage device has a built-in auto recognition program or uses its own driver, it may not work. ^ Some USB storage devices may not work or may work incorrectly. ^ Use only USB storage devices formatted with the Windows FAT32 or NTFS File System. ^ For external USB HDDs, it is recommended that you use devices with a rated voltage of less than 5 V and a rated current of less than 500 mA. ^ It is recommended that you use USB memory sticks of 32 GB or less and USB HDDs of 1 TB or less. ^ If a USB HDD ...
Other models in this manual:Televisions - 42LM3400 (7.67 mb)
Televisions - 42LM340T (7.67 mb)
Televisions - 42LM580T (7.67 mb)