Votes - 2, Average rating: 3.5 ( )

Manafacture: LG File size: 148.98 kb File name: Language of manual:

Photos and specs  LG  21FU3RG

Other manuals for this model:

Televisions - 21FU3RG (178.05 kb)

2. Press the GREEN button. All the following programmes are shifted down one position. Moving a programme 1. Select a programme to be moved with the D DD / E EE or F FF / G GG button. 2. Press the YELLOW button. 3. Move the programme to the desired programme number with the D DD / E EE or F FF / G GG button. 4. Press the YELLOW button again to release this function. Skipping a programme number 1. Select a programme number to be skipped with the D DD / E EE or F FF / G GG button. 2. Press the BLUE button. The skipped programme turns to blue. 3. Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the D DD / E EE button dur ing normal TV viewing. If you want to select the skipped programme, directly enter the pro gramme number with the NUMBER buttons or select it in the programme edit or table menu. Repeatedly press the MENU button to return to normal TV viewing. Calling the programme table You can check the programmes stored in thememory by displaying the programme table. Note :a.You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode. b.Some programmes with the channel numbershown in the programme table indicate there is nostation name assigned. Picture adjustment Note: Picture menu options are not available forthe RGB input source. PSM (Picture Status Memory) The picture Dynamic, Standard, Mild and Game are programmed for good picture reproduction at the factory and cannot be changed. XD You can enjoy the vivid and hi-definition picture withLG’s excellent Digital Reality processor technology. Eye (option) When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions. At this time the display in green does notappear continuously but the display in yellowappears each time the picture condition changes. Note:a.The eye function is automatically switched off. b.EYE function is not available for RGB input source. Time Setting Setting the On/Off timer By using this function, the set automatically switches on or off at a preset time. You must set the time correctly before using the on/off time function. Note : a. On time works only in standby mode. b. To view the remaining on/off time, select the Time menu. c. When you switch the main power off, theClock is reset . Auto off If you select On on the Auto off pull-down menu, the set will automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. Sound adjustment SSM (Sound Status Memory) Sound Frequency Adjustment Press the G GG button in User to display theUser sub menu. The sound Flat, Music, Movie and Sports are programmed for good sound reproduction at the factory and cannot be changed. Turbo sound selection When this function is on, the sound will be more emphasized and amplified than normal sound. Sound adjustment You can adjust balance,Treble, Bass, AVL (AutoVolume Leveler), AVL automatically keeps on anequal volume level even if you change programmes. The Turbo sound creates an all aroundsound as in a concert hall. X-WAVE (Wireless Sound) (option) You can also listen to the sound through the FMreceiver. Note: a. If the reception is poor or weak, select a different frequency. b. For best results, there should be no more than5m (16.4ft) between the TV and FM Receiver. c. In certain areas, the FM transmitter ability maybe weak, such as near a broadcast tower. d. The reception sensitivity may depend on thekinds of receiver(FM radio). Sound output selection In AV mode, you can select output sound for the left and right loudspeakers. Repeatedly press the I/II/* button to select the sound output. L+R :Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loud-speaker. L+L :Audio signal from audio L input is sent to left and right loud-speakers. R+R...

Download now

Please, enter two numbers from picture: