Votes - 4, Average rating: 4 ( )

Manafacture: Samsung File size: 2.26 mb File name: Language of manual:

Other manuals for this model:

Televisions - SP47W3HF (293.26 kb)

Televisions - SP47W3HF (2.59 mb)

2 Select the appropriate language by pressing the or button. Press the Menu button to enter the language. Result: The message Antenna input check is displayed. . If any language is not selected on the Language menu, the Language menu will disappear about 30 seconds later. 3 Make sure that the antenna is connected to the TV. Press the . or .button. Result: The ATM menu is displayed. 4 Select your country by pressing the . or . button. 5 To search the channels, press the button. Result: The channels are stored in an order which reflects their positions in the frequency range. Finally, the search will end automatically. When the channels have been stored, the Time menu is displayed with Clock is selected. . To stop the search before it has finished, press the Menu button. 6 Press the . or .button to move to the hour or minute. Set the hour or minute by pressing the or button. . Refer to “Setting and Displaying the Current Time” on page 34. 7 When you have finished, press the Menu button. Result: The message Enjoy viewing your new TV is displayed, and then the channel which has been stored will be activated. Plug and Play Feature If you want to reset this feature... ENG Press the Menu button. Result: The main menu is displayed. Press the or button to select Function. Result: The options available in the Function group are displayed. Press the button. Press the or button to select Plug & Play. Press the button. Result: This feature starts with the message Plug & Play is displayed. 15 To become familiar with the various menus provided by your television, you can view the inbuilt demonstration. 16 ENG Choosing Your Language Viewing the Demonstration Menu Video English ЬА Hrvatski Cestina Netherland Francais 1 Press the Menu button. Result: The main menu is displayed. 2 Press the or button to select Function. Result: The options available in the Function group are displayed. 3 Press the button. 4 Press the or button to select Demonstration. Press the button. Result: Each of the menu options is displayed in turn. . When you wish to exit from the demonstration, press the TV button on the remote control. When you start using your television for the first time, you must select the language which will be used for displaying menus and indications. 1 Press the Menu button. Result: The main menu is displayed. 2 Press the or button to select Function . Result: The options available in the Function group are displayed. 3 Press the button. Result: The Language is selected. 4 Press the button again. Result: The languages available are listed. 5 Press the or button to select the appropriate language. Adjusting Convergence If the color appears spread out or “smeared” on the screen, the convergence probably needs alignment. Be sure to use the remote control for the convergence adjustments. (The Convergence Adjustment can not be made by using the control buttons on the front panel.) Press the MENU button. Result: The main menu is displayed. Press the or button to select Function. Result: The options available in the Function group are displayed. Press the button. Press the or button to select Convergence. Press the button. Result: The options available in the Convergence group are displayed with Red is selected. Press the button again. Result: A crosshair pattern is appeared. Adjust convergence by using your remote control. . Use the //./. buttons to all directions for select the position. Press the “0” button to select red or blue convergence. . To move the line so that it is superimposed on the horizontal or vertical center-line, use the volume up/down (VOL +/-) and channel up/down (P / ) buttons (i.e., make a signal horizontal or vertical line that is as white as possible). . Press the Menu button to exit. You can adjust convergence automatically for the optimum in the factory. Select Perfect Focusin the Function group, then press the button. Result: Perform Perfect Focus in the following sequence: green red blue. After the cursor flickers for one second, the perfect focus feature ends. . You can also adjust simply by pressing the Perfect Focus button. 17 ENG ON . When the size of the sub picture is selected to the “12 PIP” or “3 PIP” mode, the Perfect Focus feature does not work. ENG ENG Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the Menu button. Result: The main menu is displayed. 2 Press the or button to select Channel. Result: The options available in the Channel group are displayed. 3 Press the button. Result: The Country is selected. 4 Press the button again. Select your country by pressing the or button. The countries are displayed in the following order: Belgium -Germany -Spain -France -Italia -Netherlands -Swizerland...

Download now

Please, enter two numbers from picture: