Votes - 1, Average rating: 3
(
)
)
|
Other manuals for this model:
manual abstract
49 . ADDITIONAL INFORMATION AND CONNECTIONS ¦ Connecting to the External Input/Output ....................................................... 50 ¦ Connecting to the Audio Output .................................................................... 51 ¦ Connecting to the S-Video Input.................................................................... 51 ¦ Connecting to the Digital Input ...................................................................... 52 ¦ Connecting to the Component Input.............................................................. 53 ¦ Connecting to the PC Input ........................................................................... 53 ¦ Setting up Your PC Software (Windows only)............................................... 54 ¦ PC/HDMI(DVI) Input Mode............................................................................ 55 ¦ Redirecting an Input to the External Output .................................................. 56 . RECOMMENDATIONS FOR USE ¦ Setting Up Your Remote Control................................................................... 57 ¦ Programming the Remote Control for Other Components ............................ 58 ¦ Replacing the Lamp....................................................................................... 60 ¦ Troubleshooting: Before Contacting Service Personnel................................ 61 ¦ Technical Specifications................................................................................ 62 English - 4 Control Panel of Your Television . The actual configuration on your TV may be different, depending on your model. Standby state. (Standby indicator; Red) Press and hold the POWER button for a few seconds to turn the TV on or off. Press to decrease or increase the volume and to select items when using the on- screen menu. Press to see the on-screen menu. Auto timer on has been set. (Timer indicator) Press to switch between viewing TV programs and signals from connected components. Press to change channels and to move between items on the on-screen menu. Press to activate (or change) a particular item. Aim the remote control towards this spot on the TV. . Touching the control panel using your finger will light up Blue LEDs for all buttons. At this moment, locate the desired button and touch it to operate. English - 5 Connection Panel of Your Television . The actual configuration on your TV may be different, depending on your model. The Information window appears as illustrated above while the TV is turning on. (Refer to the TV set’s display for animation details). When successfully turned on, an animated “Smile” figure appears and then fades out slowly. When these indicators appear, there is a possible problem with the TV. Lamp or other component may be defective. Please contact a certified technician. Check if the ventilation hole on the rear of the set is blocked, because if the inner temperature is too high, the power will shut off. A cooling fan inside the set is not operating normally. The TV’s rear cover is not properly shut. Appears while the TV is turning off. . It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately. . The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working. English - 6 English - 7 Connection Panel of Your Television (continued) . The actual configuration on your TV may be different, depending on your model. OE ANT IN Coaxial connector for aerial or cable network. . S-Video Input Connect to S-Video output jacks of an S-VHS VCR or DVD player. . Audio/Video Input Connect to the audio/video output jacks of VCRs, DVD players and similar devices. . COMPONENT Input Connect to the audio and video outputs of DVD or DTV Set-Top Box. 480i/480p/576i/576p/720p/1080i Y, PB and PR video signal outputs are available. . Audio Output Connect to the external audio amplifier. O SCART Input/Output Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players. . PC Input Connect to the PC audio/video outputs. ” DVI Audio Input Connect to the audio output jacks for device with DVI output. ’ HDMI/DVI Input Connect to the digital device with HDMI or DVI output. . SERVICE Jack It is for repairs and software upgrades. Switch the TV on and off Press the power switch toward “ I ” (ON) to turn the TV on. Connecting to an Aerial or Cable Television Network Rear of the TV Cable Television Network or To view television channels correctly, a signal must be received by the set from one of the following sources: . An outdoor aerial . A cable television network . A satellite network 1 In the first three cases, connect the aerial or network input cable to the ANT IN jack on the rear of the television. 2 If you are using an indoor aerial, you may need to turn it when tuning your television until you obtain a picture that is both sharp and clear. For further details, refer to: . “Storing Channels Automatically” on page 15. . “S...
Other models in this manual:Televisions - SP-50L7HXR (3.43 mb)
Televisions - SP-56L7HXR (3.43 mb)