Votes - 2, Average rating: 3.5
(
)
)
|
Other manuals for this model:
manual abstract
However, a device may not turn off if recording is in progress. N May not be enabled depending on the device. .. English . Switching between Anynet+ Devices 1. Press the TOOLS button to select Anynet+ (HDMI-CEC). And then press the ENTERE button to select Device List. NIf you cannot find a device you want, select Refresh to refresh the list. 2. Select a device and press the ENTERE button. You can switch to the selected device. NThe Device List menu will only appear when you set Anynet+ (HDMI-CEC) to On in the System menu. .. English . Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation. . If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List. . . English . Listening through a Receiver You can listen to sound through a receiver (i.e Home Theatre) instead of the TV Speaker. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. NIf your receiver supports audio only, it may not appear in the device list. NThe receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV. .. English NWhen the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver. .. English . Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. . • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Only one receiver (home theatre) can be connected. • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device’s Video/Audio/HDMI cable connections. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. • Check whether the TV remote control is in TV mode. . • Check whether the remote control is Anynet+ compatible. • Anynet+ doesn’t work in certain situations. (Searching channels or Plug & Play (initial setup), etc.) • When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off and on again. • Check if the Anynet+ Function of Anynet+ device is set on. English I want to start Anynet+. • Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. • Press the TOOLS button to display the Anynet+ menu and select a menu you want. I want to exit Anynet+. • Select View TV in the Anynet+ menu. • Press the SOURCE button on the TV remote control and select a non- Anynet+ device. The message “Connecting to Anynet+ device...” appears on the screen. • You cannot use the remote control when you are configuring Any...
Other models in this manual:Televisions - UE27D5000NW (5.69 mb)
Televisions - UE32D5500RP (5.69 mb)
Televisions - UE32D5500RW (5.69 mb)
Televisions - UE32D5520RK (5.69 mb)