Votes - 4, Average rating: 4.3
(
)
)
|
manual abstract
• To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec. Press the ^ or Ў button, then press the ENTEREbutton. Select the appropriate country. If the desired country does not exist on the menu, select Others. . After selecting the Country in the Country menu, some models may proceed with an additional option to setup the pin number. . When you input the PIN number, 0-0-0-0 is not available. Press the ^ or Ў button, then press the ENTEREbutton. Select Air or Cable. Press the ^ or Ў button, then press the ENTEREbutton. Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel > Auto Store (p. 12). . Press the ENTERE button at any time to interrupt the memorization process. Set the Clock Mode automatically or manually. Press the ^ or Ў button to select Auto, then press the ENTEREbutton. The connection method for the best HD screen quality is displayed. Press the ENTEREbutton. 01 Getting Started IfYouWant to Reset This Feature... Select Setup -Plug&Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function. English 7 8 English Connections Connecting to an AV Device Using an HDMI or HDMI/DVI cable: HD connection (up to 720p/1080p) Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, STB satellite receiver ..HDMI IN 1(DVI), 2, DVI AUDIO IN xxWhen using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. For the DVI cable connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the DVI AUDIO IN jacks for audio. xx If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal colour). xx If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and request an upgrade. xx It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a connection error may occur. Using a Component (up to 720p/1080i) or Audio/Video (480i only) and Scart Cable Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR ..In Ext. mode, DTV Out supports MPEG SD Video and Audio only. ..To obtain the best picture quality, the Component connection is recommended over the A/V connection. HDMI OUT DVI OUT W R W R AUDIO OUT R-AUDIO-L DVD / Blu-ray player DVD / Blu-ray player Red White R W R B G G B R W R W R Y PR PB Y AUDIO OUT COMPONENT OUT R-AUDIO-L VIDEO OUT AUDIO OUT R-AUDIO-L R W Y Y R W R B G W R EXT VCR Red Red White Blue Green VCR / DVD DVD / Blu-ray player White Red Yellow Connecting to an Audio Device Connecting to an Audio Device Using an Optical (Digital) or Headphone Connection Available devices: digital audio system, amplifier, DVD home theatre 02 Connections .DIGITALAUDIOOUT(OPTICAL) xWhen a Digital Audio System is connected to the DIGITALAUDIOOUT(OPTICAL)jack, decrease the volume of both the TV and the system. x5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH. xWhen the receiver (amplifier or DVD home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD home theatre. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the amplifier or DVD home theatre. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre. .HeadphonesH: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled. xSound function may be restricted when connecting headphones to the TV. xHeadphone volume and TV volume are adjusted separately. OPTICALdigital audio system CONNECTIONS COMMON INTERFACE Slot To watch paid channels, the “CI or CI+ CARD” must be inserted. • If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”. • The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. • When the co...
Other models in this manual:Televisions - PS50C430A1W (25.21 mb)