Votes - 2, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV. • Make sure your connected devices are powered on. ► • Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote. • Reboot the connected device by reconnecting the device’s power cable. English A Issues Solutions and Explanations RF(Cable/Antenna) Connection The TV is not receiving all channels. • Make sure the Antenna cable is connected securely. • Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU - System - Plug & Play (Initial setup) and wait for all available channels to be stored. • Verify the Antenna is positioned correctly. The picture is distorted: macro block error small block, dots, pixelization • Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action movies. • A low signal can cause picture distortion. This is not a TV issue. ► English A Issues Solutions and Explanations PC Connection A “Mode Not Supported” message appears. • Set your PC’s output resolution so it matches the resolutions supported by the TV. “PC” is always shown on the source list, even if a PC is not connected. • This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected. The video is OK but there is no audio. • If you are using a HDMI connection, check the audio output setting on your PC. ► English Issues Solutions and Explanations Network Connection ! for LED 5 series 32-46 The wireless network • Samsung Wireless USB dongle is required to use a connection failed. wireless network. • Make sure the Network Connection is set to Wireless. • Make sure the TV is connected to a wireless IP sharer (Router). Software Upgrade over the network fails. • Try Network Settings in Network menu. • If you have latest SW version, SW upgrade will not proceed. ► English A Issues Solutions and Explanations Others The picture will not display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. • Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV. • Adjust the picture size options on your external device or TV to full screen. The remote control does not work. • Replace the remote control batteries with the poles (+/-) in the right direction. • Clean the sensor’s transmission window on the remote. • Try pointing the remote directly at the TV from 5~6 feet away. ► English Issues Solutions and Explanations The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume. • Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code. A “Mode Not Supported” message appears. • Check the supported resolution of the TV, and adjust the external device’s output...
Other models in this manual:Televisions - UA32D4000NW (2.78 mb)
Televisions - UA32D5000PW (2.78 mb)
Televisions - UA40D5000PW (2.78 mb)
Televisions - UA46D5000PW (2.78 mb)