Votes - 1, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
Give easily remembered numbers to the channels that you watch most often. Press the MENU button. Result: The main menu is displayed. Press the or button to select Channel. Press the ENTER button. Result: The options available in the Channel group are displayed. Press the or button to select Sort. Press the ENTER button. Result: The Prog., Ch. and Name are displayed. Select the channel number that you wish to change by pressing the or button repeatedly. Press the ENTER button. Result: The selected channel number and name are moved to right side. Press the or button to move to the position in which you would like to change and then press the ENTER button. Result: The selected channel is exchanged with the one previously stored to the chosen number. Repeat steps 4 to 5 for another channel to be sorted. English-19 Assigning Channels Names Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Channel. Press the ENTER button. Result: The options available in the Channel group are displayed. 3 Press the or button to select Name. Press the ENTER button. Result: The current Prog., Ch. and Name are displayed. 4 If necessary, select the channel to be assigned to a new name by pressing the or button. Press the ENTER button. Result: The selection bar is displayed around the name box. 5 To... Then... Select a letter, number or symbol Press the or button Move on the next letter Press the button Move back the previous letter Press the button Confirm the name Press the ENTER button The characters available are : Letters of the alphabet (A~Z) Numbers (0~9) Special characters ( _, space) 6 Repeat steps 4 to 5 for each channel to be assigned to a new name. 7 When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing. English-20 Fine Tuning Channel Reception If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however, the signal is weak or distorted, you may have to fine-tune the channel manually. Select the channel that you want to fine tune. Press the MENU button. Result: The main menu is displayed. Press the or button to select Channel. Press the ENTER button. Result: The options available in the Channel group are displayed. Press the or button to select Fine Tune. Press the ENTER button. Result: The horizontal bar is displayed. Press the or button to reach the required setting. Press the ENTER button. Result: An asterisk “*” appears on the right-hand side of the channel number. The channel number becames red. To reset the fine-tuning, select Reset by pressing the or button and then press the ENTER button. When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing. Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner. And the channel number becames red. English-21 e Standard ou can select the type of picture which best corresponds to your viewing requirements. Press the MENU button. Result: The main menu is displayed. Press the or button to select Picture. Result: The options available in the Picture group are displayed. Press the ENTER button. Press the ENTER button again. Result: The options available in the Mode group are displayed. Press the ENTER button. Result: The Mode is selected. 6 Select the required picture effect by pressing the or button repeatedly. Result: The following picture effects are available: Dynamic - Standard - Movie - Custom 7 When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing. You can also display by simply pressing the P.MODE (Picture Mode) button. English-22 Adjusting the Custom Picture Your set has several settings which allow you to control picture quality. Press the MENU button. Result: The main menu is displayed. Press the or button to select Picture. Result: The options available in the Picture group are displayed. Press the ENTER button. Press the ENTER button again. Result: The options available in the Mode group are displayed. Select the option (Contrast, Brightness, Sharpness, Colour, Tint) to be adjusted by pressing the or button. Press the ENTER button. Result: The horizontal bar is displayed. Press the or button to reach the required setting. Press the ENTER button. When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing. Each adjusted setting will be stored separately according to its input mode. The Tint is "inactivated" as following cases. • Analog mode (RF, Scart, Video, ...