Votes - 5, Average rating: 3.6
(
)
)
|
manual abstract
1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3. 2. Press the • or • button to select “Position”, then press the ENTER button. 3. Press the • or • button to adjusting the Vertical-Position. Press the • or • button to adjust the Horizontal-Position. Press the ENTER button. 4. Press the EXIT button to exit. Initializing the Image Settings (Image Reset): You can replace all image settings with the factory default values. 1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3. 2. Press the • or • button to select “Image Reset”, then press the ENTER button. 3. Press the EXIT button to exit. Adjusting the PC Screen Automatically (Auto Adjustment): Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically. 1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3. 2. Press the • or • button to select “Auto Adjustment”, then press the ENTER button. 3. Press the EXIT button to exit. English-19 RECOMMENDATIONS FOR USE Troubleshooting: Before Contacting Service Personnel No sound or picture • Check that the mains lead has been connected to a wall socket. • Check that you have pressed the POWER buttons on the right side of the panel. • Check the picture contrast and brightness settings. • Check the volume. Normal picture but no sound • Check the volume. • Check whether the MUTE button has been pressed on the remote control. No picture or black and white picture • Adjust the colour settings. • Check that the broadcast system selected is correct. Sound and picture interference • Try to identify the electrical appliance that is affecting the set and move it further away. • Plug your set into a different mains socket. Blurred or snowy picture, • Check the direction, location and connections of your aerial. distorted sound This interference is often due to the use of an indoor aerial. Remote control malfunctions • Replace the remote control batteries. • Clean the upper edge of the remote control (transmission window). • Check the battery terminals. “Check signal cable.” • Check that the signal cable is firmly connected to the PC or video sources. message is displayed. • Check that the PC or video sources are turned on. On PC mode, “Not Supported Mode.” • Check the maximum resolution and the frequency of the video adaptor. message is displayed. • Compare these values with the data in the Display Modes. The TFT LCD panel uses a panel consisting of sub pixels (LE15S5 - 2,359,296, LE20S5 - 1,440,000) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. Technical and Environmental Specifications Model Name LE15S5 LE20S5 Panel Size Display Size Pixel Pitch 15” Diagonal 304.1 (H) x 228.1 (V) mm 0.297 (H) x 0.297 (V) mm 20” Diagonal 408.0 (H) x 306.0 (V) mm 0.6375 (H) x 0.6375 (V) mm Frequency Horizontal / Vertical 30 ~ 69 kHz / 50 ~ 75 Hz 28 ~ 33 kHz / 50 ~ 75 Hz PC Resolution (Optimum) 1024 x 768 @ 60 Hz 800 x 600 @ 60 Hz Power Supply (Input) AC 220 V ~ 240 V (50 / 60 Hz) AC 220 V ~ 240 V (50 / 60 Hz) Power Consumption Normal / Power Saving 40 W / < 3 W 55 W / < 3 W Dimension (WxDxH) Body With stand 496.0 x 82.0 x 333.0 mm 496.0 x 170.0 x 359.0 mm 607.0 x 94.0 x 436.0 mm 607.0 x 215.0 x 464.0 mm Weight With stand 4.0 kg (8.81 lbs) 7.8 kg (17.19 lbs) Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity 10 °C to 40 °C (50 °F to 104 °F) 10 % to 80 %, non-condensing -20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensing 10 °C to 40 °C (50 °F to 104 °F) 10 % to 80 %, non-condensing -20 °C to 45 °C (-4 °F to 113 °F) 5 % to 95 %, non-condensing English-20 Table des matieres CONNEXION ET PREPARATION DE VOTRE TELEVISEUR REGLAGE DES AUTRES OPTIONS Liste de pieces.......................................................... 2 Reglage du socle...................................................... 2 Reglage de l'angle du televiseur .......................... 2 Installation du kit de montage mural ........................ 3 Installation de dispositifs de montage conformes VESA ...................................................... 3 Presentation du panneau de commande ................ 3 Presentation du panneau de branchement .............. 4 Presentation de la telecommande............................ 5 Installation des piles dans la telecommande............ 6 Mise en marche et arret .......................................... 6 Mode de mise en veille de votre television .............. 6 Plug & Play .............................................................. 6 REGLAGE DES CANAUX Memorisation automatique des chaines .................. 7 Memorisation manuelle des chaines........................ 8 Edition des chaines ....................................
Other models in this manual:Televisions - LE20S51BP (13.05 mb)