Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
of 12 hours) and finally press a to store. Finally press the standby button I/O on the remote control. After the selected length of time, the TV switches on automatically and "On Timer" will appear on the screen. The On Timer indicator^ on the TV set lights up in amber to indicate that "On Timer" is active. Any loss of power will cause these settings to be cleared. If no buttons are pressed for more than one hour after the TV is turned on using the "On Timer", the TV automatically goes into standby mode. 121 Menu System 0 Channel Set Up f> Channel Set Up f> Channel Set Up m Auto Tuning Ll Auto Tuning J> Programme Sorting J Programme Sorting (0 Programme Labels w Programme Labels 3 Manual Programme Preset w Manual Programme Preset a w Ö Select®® © Confirm® End® Select®®®® Confirm® End® The "Channel Set Up" menu allows you to preset channels on this TV. Auto Tuning The "Auto Tuning" option in the "Channel Set Up" menu allows you to automatically search and store all available TV channels. To do this: After selecting the option, press ^ and then proceed in the same way as in the step 4 of the section "Switching On the TV and Automatically Tuning" (see page 8). The "Programme Sorting" option in the "Channel Set Up" menu allows you to change the order in which the channels (TV Broadcast) appear on the screen. To do this: After selecting the option, press ^ and then proceed in the same way as in step 5b) of the section "Switching On the TV and Automatically Tuning" (see page 9). Programme Labels The "Programme Labels" option in the "Channel Set Up" menu allows you to name a channel using up to five characters (letters or numbers). To do this: 1 After selecting the option, press ^. Press ♦ or^ to select the programme number with the channel you wish to name, then pressQD. 2 Press ^. With the first element of the label column highlighted, press ♦ or^ to select a letter or number (select "_" for a blank), then press ^ to confirm this character. Select the other four characters in the same way. Finally press to store. continued... Programme Sorting Menu System 113 Manual Programme Preset The "Manual Programme Preset" option in the "Channel Set Up" menu allows you to: a) Preset channels or a video input source one by one to the programme order of your choice. To do this: 1 After selecting the "Manual Programme Preset" option, press #. Highlight the Programme option and press #. Pressé or ♦ to select a programme number on which you want to preset the channel (for VCR, select programme number "0"), then press 4. (^1 The following option is only available depending on the country you have selected in the "Language/Country" menu. 2 After selecting the System option, press ^. Press # or# to select the appropriate broadcast TV system (B/G or D/K) until the correct sound is heard, then press a ■ 3 After selecting the Channel option, press #. Then press# or ♦ to select the channel tuning (C for terrestrial channels or S for cable channels). Next press#. After that, press the number buttons to directly enter the channel number of the TV Broadcast. If you do not know the channel number, press# or ♦ to search for it. When you tune the desired channel, press a twice to store. Repeat all the above steps to tune and store more channels. b) Normally the automatic fine tuning (AFT) will give the best possible picture, however you can manually fine tune the TV to obtain a better picture if the picture is distorted. To do this: While watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press#. Next press # or# to adjust the fine tuning between -15 and +15. Finally pressQ twice to store. c) Skip any unwanted programme numbers when they are selected with the PROG +/- button. To do this: Highlighting the Programme option, press PROG +/- to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press ^. Next press # or# to select Yes. Finally press a twice to confirm and store. To cancel this function afterwards, select No instead of Yes in the step above. 141 Menu System S Set Up p Set Up p Set Up SI Language/Country S) Language/Country J> Picture Rotation J> Picture Rotation (J) RGB Centring: 0 k e> RGB Centring: 0 3 a V s Select®® 8> Confirm® EndS Select®®®® Confirm® End @8 The "Set Up" menu allows you to alter various options on this TV. Language/ Country Picture Rotation (only for KV-21CT1B) RGB Centring The "Language/Country" option in the "Set Up" menu allows you to select the language that the menus are displayed in. To do this: After selecting the option, press ^ and then proceed in the same way as in the step 2 and 3 of the section "Switching On the TV and Automatically Tuning" (see page 8). Because of the earth's magnetism, the picture might slant. In this case, you can correct the picture slant by using the option "Picture Rotation"...
Other models in this manual:Televisions - KV-21CT1B (1.09 mb)