Votes - 2, Average rating: 4
(
)
)
|
manual abstract
The adjusted settings will be received when you select “Custom”. • “Hue” can be adjusted for the NTSC color system only. • Reducing “Sharpness” can also reduce picture noise. J “Sound” setting Press WEGA GATE and select “Settings”. Press V or v to select the “Sound” icon ( ), then press . Sound Intelligent Volume: Off Select Confirm End “Intelligent Volume” Adjust the volume of all program numbers and video inputs automatically. Press V or v to select “On”, then press . To cancel, select “Off”, then press . K “Channel Setup” setting Press WEGA GATE and select “Settings”. Press V or v to select the “Channel Setup” icon ( ), then press . Confirm End Channel Setup Select Auto Program Manual Program Program Sorting/Edit “Auto Program” Preset channels automatically. “Manual Program” Manually preset desired channels and channels that cannot be preset automatically (see Presetting channels manually). “Program Sorting/Edit” Sort and edit the channels. (a) If you wish to keep the channels in the current condition, press WEGA GATE to exit. (b) Press V or v to select the program number with the channel you wish to change. The selected channel will appear on the screen. (c) If you wish to store the channels in a different order: (1) Press b to enter sorting mode. (2) Press V or v to select the new program number position for your selected channel, then press B. (d) If you wish to edit the channels, press to change to edit mode. Press b until the mode that you wish to edit is highlighted: Label, Skip, (block symbol). Then press . (1) To label, press V or v to select the alphanumeric characters for the label. Then press . (2) To skip the program number, press V or v to select “On”. Then press . You can skip this program number when using PROG +/–. (3) To block unwanted program number, press V or v to select . Then press . (e) Repeat step (b) to (d) if you wish to change other channels. Press WEGA GATE to exit. • If you preset a blocked program number, that program number will be unblocked automatically. • If you sort a blocked program, that program will remain blocked. “Channel Setup” setting (continued) Presetting channels manually 1 After selecting “Manual Program”, select the program number to which you want to preset a channel. (1) Make sure “Program” is selected, then press (2) Press V or v until the program number you want to preset appears on the menu, then press . . 01 D/K 2 2 Select the desired channel. (1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press . (2) Press V or v until the desired channel’s broadcast appears on the TV screen, then press . 3 If the sound of the desired channel is abnormal, select the appropriate TV system. (1) Press V or v to select “TV System”, then press . (2) Press V or v until the sound becomes normal, then press . 4 If you are not satisfied with the picture and sound quality, you may be able to improve them by using the “Fine” tuning feature. (1) Press V or v to select “Fine”, then press . (2) Press V or v to select “Manual”, then press . (3) Press V,v,B or b until the picture and sound quality are optimal, then press . The + or – icon on the menu flashes while tuning. 5 If the TV signal is too strong (picture distorted; picture with lines; signal interference) or weak (snowy picture), you may be able to improve the picture quality by setting the “Signal Booster” feature. (1) Press V or v to select “Signal Booster”, then press . (2) Press V or v to select either “Off” (for picture distorted; picture with lines; signal interference) or “Auto” (for snowy picture), then press . L “Setup” setting Press WEGA GATE and select “Settings”. Press V or v to select the “Setup” icon ( ), then press . Confirm End Setup Select Language: Video Label Color System: Auto Factory Settings English “Language” Change the menu language. Press V or v to select either “English” or “ ” (Russian), then press . “Video Label” Label the connected equipment. (1) Select “Video Input” and press . Press V or v to select the input you want to label, then press . (2) Select “Label” and press , then press V or v to select the label options: “Video 1”/“Video 2” , “VCR”, “SAT”, “Game” or “Edit”*. * You may edit the video label to your favorite name. Press V or v to select alphanumeric characters for the label, then press . “Color System” Select the color system. Press V or v to select either “Auto”, “PAL”, “SECAM”, “NTSC3.58” or “NTSC4.43”, then press . Normally, set this to “Auto”. “Factory Settings” Reset your TV to factory settings. Press and press V or v to select “Yes”. Then press . Your TV will go blank for a few seconds, then the “Initial Setup” menu will appear. To cancel, select “No”, then press . 3-211-233-11 (1) Trinitron Color TV Инструкция по эксплуатации • Перед работой с устройством внимательно прочтайте инструкцию и сохраните её для дальнейшего использования. RU KV-BZ213 © 2007 Sony Corporation M70 A Технические характеристики KV-BZ213M70 Примечания Требования к источнику 110-240 В...