Votes - 4, Average rating: 4.5 ( )

Manafacture: Sony File size: 929.21 kb File name: 3198746111.pdf Language of manual:

• Use the fine tuning (“Fine”) function (see K). TV cannot receive stereo broadcast sound or stereo broadcast sound switches on and off or is distorted (KV-AW21M91A only). • Check the antenna setup and other connections. Troubleshooting (continued) The 1 (standby) indicator on your TV flashes red several times after every three seconds. • Count the number of times the 1 (standby) indicator flashes. Press 1 on the TV to turn it off, disconnect the AC power cord and inform your dealer or Sony service center of how the indicator flashes (duration and interval). The TV screen sometimes goes blank for slightly longer than usual during channel change. • The “Signal Booster” is functioning to detect a weak signal. This does not indicate a malfunction. TV cabinet creaks. • Changes in room temperature sometimes make the TV cabinet expand or contract, causing a noise. This does not indicate a malfunction. A small “boom” sound is heard when the TV is turned on. • The TV’s demagnetizing function is working. This does not indicate a malfunction. H WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs and “Settings” menu. ConfirmSelect WEGA GATE Settings External Inputs TV 01 02 03 04 05 TV ConfirmSelect End External Inputs ConfirmSelect End Video 11 2 Video 2 Confirm End Picture Select Color Temperature: Cool Picture Adjustment Picture Mode: Vivid Intelligent Picture: On Signal Level Indicator: On watch the preset TV channels (see D) (see E) “TV” “External Inputs” “Settings” select the inputs for the connected equipment change the settings of your TV (see I,J,K,L) How to use WEGA GATE ConfirmSelect WEGA GATE Settings External Inputs TV TV 01 02 03 04 05 Select Confirm End (or b) to confirm your selection the WEGA GATE menu. or go to the next level. (1) Press WEGA GATE to display or cancel (2) Press 01 02 03 04 05 TV ConfirmSelect End ConfirmSelect WEGA GATE Settings External Inputs TV (3) Press V or v to select the desired item. (4) Press RETURN to move to the previous level. • When a feature is dimmed in the menu, it is not selectable. • The WEGA GATE, and V,v,B,b buttons on the front panel can also be used for the operations above. I “Picture” setting Press WEGA GATE and select “Settings”. Make sure the “Picture” icon ( ) is selected, then press . Picture Color Temperature: Cool Picture Adjustment Picture Mode: Vivid Intelligent Picture: On Signal Level Indicator: On Select Confirm End “Picture Mode” Choose either “Vivid” (bright, contrast and sharp), “Standard” (normal) or “Custom”*. “Color Temperature” Adjust white color tint. Choose either “Cool” (blue tint), “Neutral” (neutral tint) or “Warm” (red tint). “Intelligent Picture” Optimize picture quality. Press V or v to select “On”, then press . To cancel, select “Off”, then press . “Signal Level Indicator” Display the signal level when the “Intelligent Picture” is functioning. “Intelligent Picture Signal Level” indicator will be displayed, followed by picture improvement when you change the program number or the input mode. red amber green (weak) (average)(fair ................. good) Press V or v to select “On”, then press . To cancel, select “Off”, then press . “Intelligent Picture” is still functioning. *You can adjust the setting to your personal preference in the “Picture Adjustment” and “Color Temperature” options only when the “Custom” mode is selected. Adjusting the “Picture Adjustment” items under “Custom” mode 1 1 Press V or v to select either “Picture” (contrast), “Brightness”, “Color”, “Hue” (color tones) or “Sharpness”, then press . Selecting “Reset” will set your TV to the factory settings. Press V,v,B or b to adjust the setting of your selected item, then press . 3 Repeat the above steps to adjust other items. The adjusted settings will be received when you select “Custom”. • “Hue” can be adjusted for the NTSC color system only. • Reducing “Sharpness” can also reduce picture noise. J “Sound” setting Press WEGA GATE and select “Settings”. Press V or v to select the “Sound” icon ( ), then press . Confirm End Sound Balance Sound Adjustment Sound Mode: Dynamic Intelligent Volume: Off Surround: Off Select “Sound Mode” Choose either “Dynamic” (low and high tones), “Standard” (KV-AW21M91A only) (voice and high tones) or “Custom”*. “Balance” Press v or B to emphasize the left speaker. Press V or b to emphasize the right speaker. “Intelligent Volume” Adjust the volume of all program numbers and video inputs (KV-AW21M91A only) automatically. Press V or v to select “On”, then press . To cancel, select “Off”, then press . “Surround” Choose either “On” (surround), “Simulated” (stereo-like (KV-AW21M91A only) monaural sound) or “Off”. *You can adjust the setting to your personal preference in the “Sound Adjustment” option only when the “Custom” mode is selected. Adjusting the “Sound Adjustment” items under “Custom” mode (KV-AW21M91A only) The 5-Band Graphic Equalizer feature allows you to adjust sound freq...

Download now

Please, enter two numbers from picture: