Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
Return to normal TV mode . Tips • Ensure that the TV is receiving a good signal, or some text errors may occur. • Most TV channels broadcast a Text service. For information on the use of the service, select the index page (usually page 100). • When four coloured items appear at the bottom of the Text page, Fastext is available. Fastext allows you to access pages quickly and easily. Press the corresponding coloured button to access the page. • Whilst you are viewing Teletext, press repeatedly to choose between four different options of brightness. Picture Freeze Freezes the TV picture (e.g. to make a note of a telephone number or recipe). 1 Press on the remote control. 2 Press <,,,m,M to adjust the position of the window. 3 Press to remove the window. 4 Press again to return to normal TV mode. change the screen mode manually to suit the broadcast Press repeatedly to select Wide, Smart, 4:3, 14:9, or Zoom. Wide Displays wide screen (16:9) broadcasts in the correct proportions. Smart* Displays conventional 4:3 broadcasts with an imitation wide screen effect. The 4:3 picture is stretched to fill the screen. 4:3 Displays conventional 4:3 broadcasts (e.g., non-wide screen TV) in the correct proportions. As a result, black border areas are visible on the screen. 14:9* Displays 14:9 broadcasts in the correct proportions. As a result, black border areas are visible on the screen. Zoom* Displays cinemascopic (letter box format) broadcasts in the correct proportions. * Parts of the top and bottom of the picture may be cut off. Tips • Alternatively, you can set “Auto Format” to “On”. If the broadcaster sends format information, the TV will automatically select the best mode to suit the broadcast (page 22). • You can adjust the position of the picture when selecting Smart, 14:9, or Zoom. Press m/M to move up or down (e.g., to read subtitles). Watching TV 15 GB Viewing pictures fromconnected equipment Switch on the connected equipment, then perform one of the following operation. For equipment connected to the scart sockets using a fully-wired 21-pin scart lead Start playback on the connected equipment. The picture from the connected equipment appears on the screen. For an auto-tuned VCR (page 11) Press PROG +/-, or the number buttons, to select the video channel. You can also press / repeatedly until the correct input symbol (see below) appears on the screen. For other connected equipment Press / repeatedly until the correct input symbol (see below) appears on the screen or press OK to access the Input signal index table. To select an input source, press m/M, then press OK. 1/ 1, 2/ 2: Audio/video or RGB input signal through the scart socket / 1 or 2. The symbol appears only if an RGB source has been connected. 3: Component input signal through the Y, PB/CB, PR/CR sockets / 3, and audio input signal through the L/G/S/I, R/D/D/D sockets / 3. 4/ 4: Video input signal through the video socket 4, and audio input signal through the audio socket L/G/S/I (MONO), R/D/D/D sockets 4. appears only if the equipment is connected to the S video socket 4 instead of the video socket 4, and S video input signal is input through the S video socket 4. 5: RGB input signal through the PC connectors 5, and audio input signal through the socket . Additional operations To Do this Return to the normal Press . TV operation Access the Input Press OK. To select an input Signal table source, press m/M, then press OK. Using the Menu Navigating through menus 2,3,4 4 1 1 Press MENU to display the menu. 2 Press M/m to select a menu icon, then press ,. 3 Press M/m to select an option. 4 Press M/m/