Votes - 3, Average rating: 3.3 ( )

Manafacture: Panasonic File size: 955.57 kb File name: TH32LR11UH.PDF Language of manual:

Off: Hides all the items above from view. Initial INPUT Off PC INPUT1 INPUT2 INPUT3 Adjusts the input signal when the unit is turned on. Notes: • Only the adjusted signal is displayed. (see page 13) • Signal can be displayed when the Terminal board is installed. • This menu is available only when “INPUT lock” is “Off”. • When a dual input terminal board is attached, A or B is displayed depending on the selected input signal. (Ex. INPUT1A, INPUT1B) Initial VOL level Press button to adjust the volume when the unit is turned on. Off On Off: Sets normal volume. On: Sets your preferred volume. Notes: • When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range. • You can hear the changed volume regardless of your volume setting before opening the options menu if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu. Maximum VOL level Press button to adjust the maximum volume. Off On Off: Sets auto maximum volume. On: Sets your preferred maximum volume. Notes: • If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automatically becomes the same as the “Maximum VOL level”. • The volume display can go up to 63 regardless of the settings. • You can hear the changed volume regardless of your volume setting before opening the options menu if you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu. Options Adjustments Item Adjustments INPUT lock Off PC INPUT1 INPUT2 INPUT3 Locks the input switch operation. Notes: • Only the adjusted signal is displayed (see page 13). • Signal can be displayed when the Terminal board is installed. • Input switch can be used when this is set to “Off”. • In two screen display mode, if anything other than “Off” is set, the value will be fixed as the value input in the single screen display mode. • When a dual input terminal board is attached, A or B is displayed depending on the selected input signal. (Ex. INPUT1A, INPUT1B) Button lock Off MENU&ENTER On Off: All the buttons on main unit can be used. MENU&ENTER: Locks MENU and ENTER/¦ buttons on main unit. On: Locks all the button on main unit. Sets Button lock with the unit buttons in the following procedure. Off: Press +/^ four times..Press INPUT four times..Press –/Ў four times..Press ENTER/¦ MENU&ENTER: Press ENTER/¦ four times..Press +/^ four times..Press INPUT four times..Press ENTER/¦ On: Press –/Ў four times..Press ENTER/¦ four times..Press +/^ four times..Press ENTER/¦ Remocon User level Off User1 User2 User3 Off: You can use all of the buttons on the remote control. User1:You can only use , , , , , buttons on the remote control. User2:You can only use button on the remote control. User3:Locks all the buttons on remote control. Advanced PIP Off: Sets normal two screen display mode (see page 17). On: Sets Advanced PIP mode (see page 18). Notes: • When “INPUT lock” is “On”, you cannot use all the two screen display functions. • , buttons are unavailable during Advanced PIP mode operation. Off-timer function Enable: Enables the “Off-timer function”. Disable: Disables the “Off-timer function”. Note: When “Disable” is set, the Off-timer is cancelled. Initial Power Mode Normal Standby On Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again. Normal: Power returns in as the same state as before the power interruption. Standby: Power returns in standby mode. (Power Indicator : red/orange) On: Power returns in power On. (Power Indicator : green) Note: When using multiple displays, “Standby” is preferred to be set in order to reduce a power load. ID select Sets panel ID number when panel is used in “Remote ID” or “Serial ID”. Set value range: 0 - 100 (Standard value: 0) Remote ID The setting of this menu is valid only when using ID remote control. Off: Disables ID remote control functions. You can use normal remote control operations. On: Enable ID remote control functions. Serial ID Sets the panel ID Control. Off: Disables external control by the ID. On: Enables the external control by the ID. Slot Power Off Auto On Off: Power is not transmitted to the slot power. Auto: Power is transmitted to the slot power only when main power is on. On: Power is transmitted to the slot power when main power is on or in the standby state. Note: In some cases, power is transmitted to the slot power when main power is on or in the standby state regardless of the slot power setting. Options Adjustments Item Adjustments Power On Screen Delay Off 1 2 3.... 30 You can set the power-on delay time of the displays to reduce the power load, when you press POWER switch to turn on the multiple displays that are set together. Set each display’s setting individually. Off: The display will be turned on at the same time as POWER switch is pressed. 1 to 30 (sec.): Set the power-on delay time (second). After pressing POWER switch, the display will be powered on with time delay depending on...

Download now

Please, enter two numbers from picture: