|
manual abstract
. . . . . . . . . . . . . . . . 95 Appendix B: Specifications ............................ 97 Appendix C: Lamp Cartridge Replacement . . . . . . . . . . . . . . . . . 99 Appendix D: Programming the Remote Control. . . . . . . . . . . . . 101 Appendix E: Troubleshooting ......................... 111 Appendix A: Bypassing the Parental Lock Lock Bypass Instructions Have Been Filed for Future Reference IMPORTANT Cut along the dotted line and file bypass instructions in a safe place for future reference. Appendices Bypassing the Parental Lock After you set the lock, you must use your pass code to view a locked program, view the locked TV, cancel the lock, or enter the Parental Lock menus. If you forget your pass code, you can view the locked TV without entering your pass code. When you are prompted for your pass code, press the number 9 and QV buttons on the TV remote control at the same time. This process temporarily unlocks the TV When entering the Parental Lock menu, this process deletes your old pass code and prompts you to enter a new pass code. Press EXIT to exit the menu. Deactivating the Front Button Lock Press and hold the MENU button on the TV front panel for over eight seconds. If the TV is off, this action turns it on. IMPORTANT When changing or deleting your pass code, you must use the remote control included with this TV. You cannot use a Mitsubishi remote control from another component or a “universal” remote. A AAAp ppp ppe een nnd ddi iic cce ees ss This page intentionally left blank A AAAp ppp ppe een nnd ddi iic cce ees ss Appendix B: Specifications Model Projection System Lamp WD-Y57, WD-Y65 WD-57732, WD-65732 DLP, 0.65” chip, 1920 x 1080 pixels with Smooth Picture™ 150-watt VIP type WD-73732 DLP, 0.843” chip, 1920 x 1080 pixels with Smooth Picture™ 180-watt VIP type Reception Channel Frequency Reception Over-the-Air: VHF 2–13, UHF 14–69 Analog Cable: 1–125 Digital Cable: 1–135 Channel Type* Over the Air: Analog NTSC, Digital ATSC with sub-channels (all 18 video formats) Cable: Analog NTSC (non-scrambled) Digital QAM 64 and 256 with sub-channels (non-scrambled) CableCARD™: Authorized scrambled and non-scrambled digital channels * Note for Digital Channels: The channel numbers displayed on screen are determined by the broadcaster or cable company and can vary from the standard frequency number. If there is no channel-number information provided by the broadcaster or cable company, the TV creates a channel number. The created channel number uses the frequency number as the main channel number and the program number as the sub-channel number. When using an authorized CableCARD, the channel numbers are determined by the cable company. Inputs Description Qty. Signal Type Input Specifications Antenna/Cable input 2 RF F connector, 75-ohm HDMI (digital video/audio) 2 HDMI EIA-861B stan- dard for digital audio and video HDMI standard connector Video: 60 Hz: 480i, 480p, 720p, 1080i 24 Hz, 30 Hz, 60 Hz: 1080p Audio: PCM stereo Note: Not for use with personal computers. Video/S-Video (one front, two rear) 3 NTSC 480i only Video: RCA Pin Plug, 1.0 V p-p, 75 ohm S-Video: Four-Pin DIN Plug Y: 1.0 Vp-p 75-ohm C: 0.286 Vp-p (burst signal), 75-ohm Component Video (Y/Pr/Pb) WD-Y57 WD-Y65 2 EIA-770.1 & EIA 770.2 480i, 480p, EIA 770.3 720p and 1080i (video standards) RCA Pin Plug (EIA-770.3 Standard Levels and Timing) Y: 1.0 Vp-p (includes sync), 75-ohm Pr: 700 mV p-p, 75-ohm Pb: 700 mV p-p, 75-ohm WD-57732 WD-65732 WD-73732 3 Audio Inputs WD-Y57, WD-Y65 8 pairs analog left and right audio RCA Pin Plug 500 mV (full scale), 43-k ohmWD-57732, WD-65732, WD-73732 9 pairs PC DVI-I Input 1 analog and digital video VGA (640 x 480, 60 Hz) W-VGA (848 x 480, 60 Hz) SVGA (800 x 600, 60 Hz) W-SVGA (1064 x 600, 60 Hz) XGA (1024 x 768, 60 Hz) 1280 x 720, 60 Hz digital video only SXGA (1280 x 1024, 60 Hz) 1920 x 1080 (24 Hz, 30 Hz, 60 Hz) WXGA (1360 x 768, 60 Hz) A AAAp ppp ppe een nnd ddi iic cce ees ss Appendix B: Specifications, continued Outputs Description Qty. Output Specifications Video 1 Video: RCA Pin Plug 1.0 Vp-p, 75-ohm Signal Type: NTSC 480i only Audio (Signal) 2 pairs RCA Pin Plug, 500 mV rms + 200 mV (full scale) for analog sources, 1.5 Vrms + 0.5 Vrms (full scale) for digital sources. Audio (Speakers) 2 5.5" x 2.2" Digital Interfaces Digital Audio Output 1 RCA Pin Plug, Signal Type, Dolby Digital, PCM IEEE 1394 (input/output) (2 rear) 2 IEEE 1394 Four-Pin-Type Terminal, S400 Physical Characteristics and Power Consumption Model Dimensions (inches) Weight Power ConsumptionHeight Width Depth WD-Y57 36 3/16 51 1/2 17 15/16 85.8 lbs. 250 w WD-Y65 40 3/4 58 1/2 19 13/16 99.0 lbs. 250 w WD-57732 36 3/16 51 1/2 17 15/16 85.8 lbs. 255 w WD-65732 40 3/4 58 1/2 19 13/16 99.0 lbs. 255 w WD-73732 44 3/4 69 7/8 21 5/16 190.0 lbs. 290 w IEEE 1394 System Compatibility • This television is designed to conform to IEEE 1394 AV/C Software standards in effect at the time of development. This networking and control technology is desi...
Other models in this manual:Televisions - WD-57732 (6.35 mb)
Televisions - WD-57732 (6.35 mb)
Televisions - WD-65732 (6.35 mb)
Televisions - WD-73732 (6.35 mb)