Votes - 3, Average rating: 4 ( )

Manafacture: Hitachi File size: 2.53 mb File name: Language of manual:

If the EXIT button is pressed while the AUTO CHANNEL SET function is engaged, programming will stop. If two antennas are connected, switch antenna inputs with the INPUT button and repeat AUTO CHANNEL SET for the second antenna input. Remember to select the correct SIGNAL SOURCE mode before using AUTO CHANNEL SET for the second antenna input. See CHANNEL MEMORY to add or erase additional channels. CHANNEL MEMORY Use this function after AUTO CHANNEL SET to add or erase additional channels to the remote control CHANNEL or buttons. INITIAL SETUP Add or erase additional channels while still in CHANNEL MEMORY using CURSOR Add or erase additional channels while still in CHANNEL MEMORY using CURSOR or , CHANNEL or , and number buttons and then add or erase using the CURSOR button. Press EXIT to quit menu or CURSOR to return to previous menu. CHANNEL LIST This function allows you to review which channels are labeled in CHANNEL ID (NAME) which have been added to CHANNEL MEMORY (SCAN), and which are protected by CHILD LOCK (LOCK). INITIAL SETUP Press CURSOR or to review more channels. Press EXIT to quit menu or CURSOR to return to previous menu. CLOCK SET The time must be set before you can use 4 EVENT PROGRAM, PERSONAL MESSAGE, SPECIAL EVENT REMINDER, or CALENDAR. INITIAL SETUP Use CURSOR or buttons to set the time, date, and year. Press CURSOR to change position. Press EXIT to quit menu or CURSOR to return to previous menu. MAGIC FOCUS Your projection TV has three color projection tubes: one for red, one for gree, one for blue. When mixed together in the proper proportion, the output of these three color tubes can produce any color. To produce these colors, however, the beams must be precisely aligned over each other so that the colors can be mixed. The process of aligning these picture beams is called "convergence". Over a period of time, the picture tubes can drift out of alignment due to normal bumps and vibrations or moving the TV. If you move your TV, or if, after a time, you notice color rings or halos around objects in the picture, you may want to converge (align) the colors. Properly converged, the lines appear white, which is actually a combination of the outputs of the three color tubes. The output of the green tube is stationary. The outputs of the red and blue tubes can be adjusted. When properly aligned, the outputs of all three tubes should be directly over each other to produce the white lines. To simplify convergence, HITACHI incorporates a function called MAGIC FOCUS, which allows the TV to self adjust. This process will take approximately 90 seconds. If this button is pressed during the 90 second period, no change in picture quality will occur. After this 90 second self adjust period, picture quality will be optimum. (Do not INITIAL SETUP NOTE: Only a momentary press of the MAGIC FOCUS button is necessary to start AUTO DIGITAL CONVERGENCE. At any time during this convergence correction process, you may press the MAGIC FOCUS button to exit the MAGIC FOCUS mode. Do not press the MAGIC FOCUS button for more than 3 seconds. This is only for extreme cases of misconvergence and requires assistance from service. If one of the pictures shown below appears on the television screen, press the MAGIC FOCUS button a second move TV during self adjust.) To enter this self adjust mode, you may also select MAGIC FOCUS from the INITIAL SETUP Menu. However, this will display a message prompting you to press the front panel MAGIC FOCUS button. time to exit this manual set up mode. CUSTOMIZE CUSTOMIZE easier and more enjoyable. This selection contains advanced features which will make TV viewing CHANNEL ID Use this feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60 channels a name when CATV1 signal source is selected. Press CURSOR or to select letters. Press CURSOR to change character position. Press CURSOR or , CHANNEL or , and the number buttons to select and label additional channels. The CHANNEL ID will now appear in the top left corner of the screen. Press EXIT to quit menu or CURSOR to return to previous menu. CUSTOMIZE The (*) represents a blank space. Select ERASE ID to erase a CHANNEL ID. NOTE: CHANNEL ID will be displayed only when channel is displayed as main picture. VIDEO ID Use this feature to give a name to any of the 3 video inputs. Press CURSOR to select the video input to be renamed. Press CURSOR or to select letters. Press CURSOR to change position. Press EXIT to quit menu or CURSOR to return to previous menu. The (*) represents a blank space. Select RESET to set VIDEO to original condition. NOTE: VIDEO ID will be displayed only when VIDEO input is displayed as main picture. FAMILY FAVORITES (MENU) This function allows you to group your favorite channels into 6 personalized categories that you can rename. A total of 24 channels for UX models and 42 channels for SX models can be stored in the FAMILY FAVORITES function. CUSTOMIZE To rename the categories, use C...

Download now

Please, enter two numbers from picture: