Votes - 5, Average rating: 4 ( )

Manafacture: Hitachi File size: 3.06 mb File name: 358701eb-12f6-429c-a6d2-d8d0d3744658.pdf Language of manual:

Figure 1-6: Convergence IC Removal 1-5 1-6 V23+++ Composite Cabinet Back The WS-55813 and WS-65813 feature a unique cabinet similar to last year’s WS-65712. It has a composite cabinet back that offers several advantages. • Rounded edges in the back have a modern appearance. • Unit construction gives it high strength. • Low Weight - The 55” version is about 50 lbs lighter and the 65” version is about 100 lbs lighter than comparable models! The disassembly procedure for the cabinet front differs from conventional cabinets. Note how the Cosmetic Front Panel is removed. Refer to Figure 1-7. Figure 1-7: V23+++ Cabinet Front Disassembly 1. Remove the Speaker Grille by pulling forward. 2. Remove 2 screws (a) securing the Cosmetic Front Panel. 3. Slide the Cosmetic Front Panel 1 inch to the right, then lift away from the TV. 4. Remove 6 screws (b) to remove the Board Front. 5. Unplug the LF connector. 6. Remove the 4 screws (c) securing the Screen Assembly. 7. Lift the Screen Assembly up and away from the cabinet. Chapter 2 Alignment Procedures With the exception of the Service Menu access codes, the general alignment procedures for the V23 chassis remains the same as previous HD chassis. A chart showing all recent Service Menu Access Codes is provided on page 12 of the Introduction. This chapter will give an overview of the following alignment procedures. • Initial Setup - Option Menu • Circuit Adjustment Mode • Convergence Adjustment Mode • Alignment Data Storage Locations For specific alignments, refer to the Service Manual. Initial Setup Option Menu - Initial Setup Prior to alignment, the procedures for initial setup should be followed so that all customer Main Menu and A/V settings are set to the factory defaults listed in Table 2-1 and Table 2-2. Follow the steps below for the initial set-up: 1) Select the "MENU" display by pressing the "MENU" button once. 2) Press the number buttons "0", "3", "7", "0" in sequence to select the "OPTION MENU" display. See Figure 2-1. 3) Press the "ADJUST" button to select "INITIAL." 4) Press "ENTER." NOTE: At this time, all Main Menu and A/ V settings will be set to the factory default settings and channel 3 will be automatically selected. (MENU-0-3-7-0) OPTION MENU Initial Power restore :OFF DTV Port :Auto Figure 2-1: Option Menu 2-1 MAIN MENU DEFAULT SETTINGS SETUP TIME Audio Volume 30% Bass 50% Treble 50% Balance 50% Surround Off Listen to Stereo Level Sound Off TV Speakers On Audio 2 Out Main Video Contrast 100% Brightness 50% Sharpness 50% Color 50% Tint 50% Color Temp. High Video Noise Standard Image Type Video VSM Sharpness On Video Mute On Black Enhancement On Edit Setup Review Antenna A (v) Enabled Antenna B (v) Enabled Input DTV (v) Enabled Input 1 (v) Enabled Input 2 (v) Enabled Input 3 (v) Enabled Component 1 (v) EnabledComponent 2 (v) Enabled Antenna DTV (v) Enabled VGA (v) Enabled MonLink (v) Enabled Card 1 (v) Enabled Card 2 (v) Enabled Card 3 (v) Enabled Card 4 (v) Enabled Icon Position As above Ant-A, Ant-B, Ant-DTV, ComFlash MemStick, SmartMed, MMC& SD Input-1, Input-2, Input-3, Comp-1, Comp-2, Input DTV, VGA, MonLink, Cards 1…4Transport Menu On Energy Mode Standard Language EnglishClock Setting Manual Time 12:00 AM Day Monday CAPTIONS Analog Captions With Mute Background Gray Digital Captions With Mute Digital Settings Appearance Default Digital Channel Guide Off V-CHIP LOCK V-CHIP Off TV Rating TV-PG FV-Fantasy Violence (v) Enabled D-Sexual Dialog (v) Enabled L-Adult Language (v) Enabled S-Sexual Situation (v) Enabled V-Violence (v) Enabled Program not Rated (v) Enabled Movie Rating PG V-Chip Time Start Time 12:00 AM Stop Time 12:00 AM Advanced Color Balance Manual PerfectColor™ CenteredLock By Time Lock by Time Off Lock Time NA Unlock Time NA Front Button Lock Off PIP/POP ANTENNA Source Ant A Ch 3 PIP Position Lower Right POP Position Right Half PIP/POP Format 2 Window Format Stretched Antenna ANT A Memorize Channels Air Channel Ch-3 Memory Deleted AUDIO/VIDEO SETTINGS A/V Memory Reset Ant-A Table 2-1: Main Menu Factory Defaults A/V RESET DEFAULT SETTINGS (By Input) A/V Memory Ant A/B Ant DTV Inp-DTV INPUTS 1/2/3 Compon. 1/2 VGA 1394 1/2/3 MonLink Card 1~4 Contrast Max. Max. Max. Max. Max. Max. Max. Max. Max. Brightness Center Center Center Center Center Center Center Center Center Sharpness Center Center Center Center Center N/A Center Center Center Color Center Center Center Center Center Center Center Center Center Tint Center Center Center Center Center Center Center Center Center Color Temp. High High High High High High High High High Video Noise Standard N/A Standard Standard Standard N/A N/A Standard N/A Image Type Video N/A Video Video Video N/A N/A Video N/A VSM Sharpness On On On On On On On On On Bass Center Center Center Center Center Center Center Center Center Treble Center Center Center Center Center Center Center Center Center Balance Center Center Center Center Center Center Center Center Center Surround OFF OFF OFF OFF OFF OFF OFF OFF OF...

Download now

Please, enter two numbers from picture: