Votes - 4, Average rating: 3.3 ( )

Manafacture: PLUS Vision File size: 2.91 mb File name: Language of manual:

Photos and specs  PLUS Vision  V3-131

Pressing the ECO button will set the lamp mode. Eco (STATUS indicator is lit green) The lamp’s brightness is reduced to approximately 80%, extending the lamp’s service life. Normal (STATUS indicator is off) The lamp brightness is set to 100% and the screen is bright. RGB STANDBY VIDEO FREEZE MUTE AUTO ASPECT TIMERVOL KSTN ZOOM CANCEL QUICK MENU ENTER Q 1 2 4 ECO 3 STANDBY AUTO SOURCE STANDBY STATUS Note: Frequent switching this mode can degrade the lamp. E-29 General Operation Keystone Use this to adjust for trapezoidal (keystone) distortion of the projected image. Adjustment Method (1) Press the or KSTN button to make the left and right sides parallel. (2) The keystone adjustment display appears when one of the buttons is pressed. RGB STANDBY VIDEO FREEZE MUTE ECO AUTO ASPECT TIMERVOL ZOOM QUICK MENU ENTER Q 1 2 3 4 KSTN CANCEL Press the “” button. Press the “” button. (1) (2) Press the CANCEL button to immediately close the display. The display will close when there has not been an operation in about 10 seconds. Note: * Keystone adjustment values can be saved. See “Keystone Save” on Page E49. * Screen examples have been drawn in an exaggerated style for the purpose of description. * Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion completely. Adjustment of the Volume This function adjusts the volume of the built-in speaker. (1) Press the or . VOL button to adjust the volume. The volume adjustment display appears when one of the buttons is pressed. The button increases the volume and the button decreases the volume. (2) Press the CANCEL button to immediately close the display. The display will close when there has not been an operation in about 10 seconds. Note: * Adjustment of the volume will not produce any sound unless an image is being projected. RGB STANDBY VIDEO FREEZE MUTE ECO AUTO ASPECT TIMERKSTN ZOOM QUICK MENU ENTER Q 1 2 3 4 VOL CANCEL (1) (2) E-30 E-31 General Operation Enlargement of the Image and Video Movement This function digitally enlarges the personal computer image and video image. (1) Press the ZOOM button to enlarge the image. The zoom display appears when the ZOOM button is pressed. Each press of the button enlarges the image and each press of the button makes the image smaller (returning it to 1:1). (No enlargement) (Approximately 2 times enlargement) The image can also be moved in the following circumstances. • When “Aspect” is set to “Real” by the signal of the personal computer, and the input resolution is higher than the display resolution of the projector. • When “Aspect” is set to “Zoom” by the video signal. Note: * Zoom and image movement functions are cancelled when the input is switched. * The greater the zoom enlargement, the less distinct the image will appear. The reason for this is that the dots are being digitally corrected so that they are not conspicuous. * Movement of the screen will not be possible when the menu screen is being displayed. Zoom 0 Zoom 21 (3) Press the CANCEL button to immediately close the display. The display will close when there has not been an operation in about 10 seconds. (2) Pressing the SELECT buttons on the remote control at the time of the zoom operation will cause the display position to move. (There will not be any movement when zoom is at 0.) (Approximately 2 times enlargement) (Movement) Zoom 21 Zoom 21 Note: After magnifying the image, be sure to use the ZOOM button to bring the gauge value back to “0”. (3) (1) (2) RGB STANDBY VIDEO FREEZE MUTE ECO AUTO ASPECT VOL KSTN TIMER CANCEL QUICK MENU ENTER Q 1 2 3 4 ZOOM General Operation Using the Presentation Timer The presentation is given while checking the timer displayed on the screen. The gauge display allows the remaining time to be known at a glance. (1) Press the TIMER button to show the settings display. The display will close when an operation has not been made for about 10 seconds. [Timer settings display] Press the CANCEL button to close the display immediately. (2) Use the and SELECT buttons to set the time. The setting contents are “Off” and from 10 to 60 minutes (in 10-minute intervals) Settings can also be made with the SELECT buttons. (3) Press the ENTER button and start the timer. • The display of the timer setting will close, the display of the timer will appear and simultaneously the timer will start. Gauge (Blue) [Timer Display] The blue gauge indicates the remaining time. When the gauge disappears,the time is up. The gauge continues to be displayed when the timer is stopped. When the remaining time is “0” (Gray) • Press the ENTER button to restart the timer. The timer will start with the same time setting. • Press the CANCEL button to close the timer display. The timer setting will return to “Off”. Moving the Position of the Timer Display The SELECT buttons on the remote control permit movement within the movable range of the timer display. (2) CANCEL button (3) RGB S...

Download now

Please, enter two numbers from picture: