Votes - 1, Average rating: 5 ( )

Manafacture: LG File size: 6.46 mb File name: Language of manual:

Working alone can cause the product to fall off and result in injury or damage to the product. During the installation, check the type of wall material and use the sealed anchor and screw if the conditions comply. If you do not use the designated anchor or screw, the mount may not be able to withstand the weight of the product and cause a safety issue. Caution Do not allow the video connectors connected to the display to press against the wall. Use the included right-angle adapters if needed. Only use attachments/accessories specified by the manufacturer. Before installation * Do not use the product for purposes other than mounting a display on the wall. * When installing/using the wall mount, be cautious of product damage and avoid accidents. * If you have not fully read and understood the installation manual, do not install the product and contact the dealer to have a specialized installer install the product for you. * Even if you are not a specialized installer, it is advantageous to have experience in mechanical or construction field in completely understanding this manual and installing the product. * This product is designed to be mounted to walls that use standard intervals between the studs. * Install the screw to attach the wall mount so that it can be assembled at the center from both ends of the studs. Use of stud finder, a separate device, is recommended. * Install the product only on a vertical wall. The manufacturer is not responsible for issue from installing the product on severely wall or on the ceiling. * Keep the included accessories out of reach of babies or children as it can cause safety issues including suffocation from swallowing the parts. * Make sure screws are tight against the wall, but do not overtighten. * Be careful not to install a TV that exceeds the weight restrictions of the wall mount. * Be careful with the tools used during installation to prevent accidents or damage. 4 Installation method 1 Fixating the mounting bracket on the TV If the screw will not fully tighten when using a guide spacer, recheck the assembly depth of the screw and refer to the technical service manual. - Installation method is described based on the LSW200B model. The actual product may differ from the picture. 1. Check to see if the display has screws installed into the mounting holes. If so, remove those. 2. Assemble the guide spacer and the guide spacer screw in order as shown in the picture. - Assemble the guide spacer to the set by tightening the screw. - Tighten the screw until the set, guide spacer and the screw are fully pressing against one another. - Use the "+" driver (Manual or motorized) when tightening the screw. 3 How to install the wall mount > When you separate the 8 screws on the wall mount connected to the wall bracket for use with a wooden wall, it is much easier to install the product. > When installing the product on a masonry wall, turn the 8 screws on the A part...

Download now

Please, enter two numbers from picture: