Votes - 1, Average rating: 4
(
)
)
|
manual abstract
3 Enter your desired time TIME SEARCH 2 : 50 Press the PLAY/K or STOP/L button until your desired time appears. (Example: “2:50” stands for 2 hours 50 minutes) If you wish to cancel the Time Search at this point, press the MENU button on the remote control. 4 Begin Time Search By pressing the REW/s or F.FWD/B button, the TV/VCR will rewind or fast forward to the specified point. The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically. TO CANCEL THE TIME SEARCH at this point Press the STOP/EJECT button on the TV/VCR or the remote control. This will delete the selected time. INDEX SEARCH – M E N U – An index signal is recorded on the TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK tape automatically when the record- CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ing is started. To view a recording at a specific start point: ZERO RETURN TIME SEARCH INDEX SEARCH 1)Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “INDEX SEARCH”, then press the F.FWD/B button. B 2)Press the PLAY/K or STOP/L button within 30 seconds until the number of programs that you want to skip appears. 3)Press the F.FWD/B or REW/s button to start index search. If you want to go forward, press the F.FWD/B button. If you want to go back, press the REW/s button. • After index search, the TV/VCR will play the tape automatically. • In some cases, the index mark at the beginning of video tape cannot be detected. SLOW MOTION Press the SLOW button to reduce the playback speed. The TV/VCR mutes the sound during slow motion. Press the PLAY button to return to normal playback. NOTE: If left in the Slow mode for more than five minutes, the TV/VCR will automatically go into the Stop mode. RENTAL PLAYBACK This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 Select “USER’S SET UP” – M E N U – Press the MENU button on the TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP B USER’S SET UP remote control. V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] Press the PLAY/K or STOP/L but ton to point to “USER’S SET UP”. ZERO RETURN TIME SEARCH INDEX SEARCH Then, press the F.FWD/B button. – USER’S SET UP – 2 Set “RENTAL” to [ON] Press the PLAY/K or STOP/L but- B RENTAL [OFF] [ON] REPEAT PLAY AUTO RETURN [OFF] ton to point to “RENTAL”. Press the F.FWD/B or REW/s button until [ON] appears. 3 Exit the Rental setting Press the MENU button on the remote control to return to the TV mode. 4 Start playback Press the PLAY button to start playback. “RENTAL PLAY B” appears. • Once you select the Rental mode, it stays in effect even after you turn off the TV/VCR. TO CANCEL THE RENTAL MODE Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode. If there is a power failure of any kind, the unit will retain its memory for this feature. - 19-EN 9I03 TRACKING ADJUSTMENTVERTICAL HOLD CONTROL In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing the CHANNEL K or L button. NOTE: If there are video noise lines on the screen, see Tracking Adjustment section. STILL PICTURE You can view a still picture on the TV screen during playback (the Still mode). Press the PAUSE/STILL button during playback. Only tapes recorded in the SLP mode will show the least amount of lines. Press the PLAY button to return to playback. NOTES: • You can advance the picture one frame at a time by pressing the PAUSE/STILL button during the Still mode. • If it is left in the Still mode for more than five minutes, the TV/VCR will automatically switch to the Stop mode. • Tracking adjustment will be set automatically (Digital Tracking function) when you start playback. • However when playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the playback picture. If this occurs, you can adjust the tracking control manually by pressing the CHANNEL K or L button until the streaks disappear. To return to the DTR function, stop the tape once and start playback again. • You can reduce the noise lines by pressing the CHANNEL K or L button in slow mode, too. Tracking adjustment in Slow mode will not be set automatically. NOTE: • In Still mode, press the SLOW button and press the CHANNEL K or L button until streaks disappear. To return to Still mode, press the PAUSE/STILL button again. RECORDING Before recording, make sure: The desired channel is selected by pressing the number buttons on the remote control or the CHANNEL Up/Down button. (If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box. ) There is a tape with its safety tab into the VCR. The desired recording speed is selected in...