Votes - 5, Average rating: 4 ( )

Manafacture: Grundig File size: 1.28 mb File name: Language of manual:

Have you made all your settings, or are you finished with “browsing” in the interactive operating instructions, switch to TV operation with »i «. Just try it out. You can’t do anything wrong. ENGLISH 12 Basic functions Switching on 1 Turn on the television set with »IO« on the television set. – If only the LED illuminates, the set is in standby mode. – Turn on the television set with »1…0« or »P+« or »P-«. Switching to and from standby 1 Press the »« button to switch the television to standby mode. 2 Press »IO« on the television set to switch it off completely. – This saves electricity. Selecting channels 1 Use »1…0« to select channels directly. 2 Press »P+« or »P-« to move up and down channels. Selecting AV channels 1 To select AV channels, press »0« to open the AV menu, press »P+« or »P-« to select the AV channel and »OK« to confirm. Adjusting the volume 1 Press »« or »« to adjust the volume. Muting 1 Press »p« to switch the sound off (mute) and to switch it on again. Displaying/concealing the clock 1 You can display or conceal the time by pressing the »« button. Changing the picture format The television automatically switches to the 16:9 format if this format is detected via the Euro-AV socket. 1 To select the picture format, press »E« to open the »Picture format« menu and press »P+« or »P-« to select the picture format and »OK« to confirm. TELEVISION OPERATION___________________ Tele Pilot 150 C @ TELEVISION OPERATION___________________ Zap function With this function you may store the current channel position and switch to another one (zap). 1 Use »1…0« or »P+«, »P--« to select the channel position you wish to store in the zap memory (e.g channel position 7, PRO7) then press »Z« to store it. – On the picture screen appears, for example, »Z 7 PRO7«. 2 Using »1…0« or »P+«, »P-« you now may switch to another channel position. 3 By pressing »Z« you may switch at any time to the stored channel position (PRO7 in the example) and switch back (zap) to the last viewed channel. 4 Press »i« to end the zap function. – The on-screen display disappears. Alphanumeric channel selection You may select the channel positions directly by entering the channel name (e.g. ARD). For this, letters are assigned to the numeric buttons »2…0«. Up to four letters can be assigned. 1 Use »2…0« to enter the first letter of the channel name (e.g. »2« for the letter A). – A list of all TV channels beginning with the letters »A«, »B«, or »C« appears on the picture screen. – Every entry of a further letter confines the list of channel names. 2 Use »P+«, »P-« to select the desired channel in the list then press »OK« to call it up. Note: Three methods are possible for selecting a channel position: 1. Letter entry off: The channels are only selected by entering digits. 2. Letter entry on: The channels are only selected by entering alphanumeric characters. 3. Mix: When entering a digit, the TV set switches automatically to the corresponding channel position and the channel list for assigning letters is displayed. The channel selection mode is selected in the »Installation« menu under the »Special functions« menu item. See also the notes in the Easy-Dialog system. ›Z 7 PRO7 ENGLISH 14 TOP text or FLOF text mode 1 Press »TXT« to switch to teletext mode. 2 You can directly select teletext pages with »1...0«. Note: At the bottom of the screen, you will see an information line consisting of a red, green and, depending on the station, yellow and blue text field. Your remote control has buttons with the corresponding colours. 3 Press »z« (red) to scroll back a page. 4 Press »« (green) to scroll to the next page. 5 Press »@« (yellow) to select chapters. 6 Press »F« (blue) to select topics. 7 Press »TXT« to switch off teletext mode. Normal text mode 1 Press »TXT« to switch to teletext mode. 2 You can directly select teletext pages with »1...0«. 3 Press »P-« to scroll back a page. 4 Press »P+« to scroll to the next page. 5 Press »TXT« to switch off teletext mode. Additional functions In teletext mode you can select and activate various functions in the »VT settings« menu, such as “Page overview”, “Present mode” and “Text size”. 1 Press »i« in teletext mode. – The »VT settings« menu appears. 2 Select the menu item with »P+« or »P-« and press »OK« to confirm. 3 Select this function using »P+« or »P-« and press »OK« to confirm. 4 Quit the »VT settings« menu by pressing »i«. Double window function With this function the television programme and teletext are displayed at the same time. 1 Press »PIP« in teletext mode. – On the left you can see the television programme, on the right the teletext. TELETEXT MODE_______________________________ Tele Pilot 150 C @ INFORMATION_____________________________________ Technical data Mains voltage: 230 V, 50/60 Hz, (power pack control range 190 ... 264 V) Power consumption: in operation 110 W, in standby approx. 1 W (Vision 26) in operation 130 W, in standby approx. 1 W (Vision 32) Sound output: Front 2 x 10 W music pow...

Download now

Please, enter two numbers from picture: