Votes - 3, Average rating: 4
(
)
)
|
manual abstract
Please follow the below steps to remove or install the function module. Remove the DVD module: Refer to the below figure and follow the below steps to remove the DVD module from the unit: Step 1: Open the back cover on the left rear panel of the unit. Step 2: remove the DVD module. 1. Loose the screw on the DVD module. 2. Unplug the MGI connecting cord from the LCD TV. 3. Remove the DVD module outward. Step 3: close the back cover. Step 1: open the back cover Step2: remove the DVD module Step3: close the back cover Installing the DVD module: There are three different positions for installing the functional module, and two MGI jacks for connecting the MGI connecting cord. Select one proper position for installing: 1. Plug one end of the MGI connecting cord into the DVD module. 2. Open the back cover on the left rear panel of the unit. 3. Insert the function module and lock the function module with one screw. 4. Plug the other end of the MGI connecting cord into the MGI jack on the unit. 5. Close the back cover. - 12 - System Connections • Do not connect the power cord until all other connections have been made. • Ensure that you observe the color cables when connecting audio and video cables. • Before connecting, open the cover on the right side of the unit’s rear panel. Connecting To External AV Signal Source (AV1) Use the audio and video cable to connect the input jacks on the right side of the unit’s rear panel to the external AV signal source. After connection, turn on the power of the unit and the external AV signal source, press the SOURCE button to enter the Input menu, then select AV1 (Composite) and press the ENTER button to enter the selected mode. -13 - System Connections Connecting To External AV Signal Source (AV2) Use the audio and video cable to connect the input jacks on the right side of the unit’s rear panel to the external AV signal source. Also use the S-Video cable to connect the S-Video input jacks on the right side of the unit’s rear panel to the external AV signal source. NOTE: S-VIDEO cable will produce good image quality. After connection, turn on the power of the unit and the external AV signal source, press the SOURCE button to enter the Input menu, then select AV2 (Composite) and press the ENTER button to enter the selected mode. If connected to the two group AV and S-Video signal sources at the same time, the S-Video is the priority. - 14 - System Connections Connecting to External AV Signal Source (AV3/ AV4) Use the audio and video cables to connect the Y/Pb (C b) /Pr (Cr) input Jacks on the right side of the unit’s rear panel to the external AV signal source. After connection, turn on the power of the unit and the external AV signal source, press the SOURCE button to enter the Input menu, then select AV3 (Component) or AV4 (Component) and press the ENTER button to enter the selected mode. NOTE: The Component cable will produce better image quality. - 15 - System Connections Connecting to HDMI Output Device This unit can be connected to the AV device with HDMI output. See the below figure for details: After connection, turn on the power of the unit and the external HDMI output device, press the SOURCE button to enter the Input menu, then select HDMI and press the ENTER button to enter the HDMI mode. -16 - System Connections Connecting to External AV Device (AV Out) Use the audio/video cables to connect the audio and video output Jacks on the right side of the rear panel to the external AV device. NOTE: The features of this A/V equipment allows you to connect to other A/V equipment. Care should be taken when connecting the A/V outputs of this device to the A/V inputs of the other device. For example, composite output of this device needs to be connected to composite inputs of the other device. - 17 - System Connections Connecting to Digital Amplifier The unit is designed with an optical digital audio jack, can be connected to the digital amplifier, see the below figure: NOTE: The optical digital audio can only output ATSC, NTSC and HDMI signals. - 18 - System Connections Connecting to PC The unit can be connected to PC (personal computer) via the VGA cable. Follow the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the right side of the unit’s rear panel. 2. Connect the other end to the PC. 3. Connect one end of the audio cables to the PC audio input jack on the right side of the unit’s rear panel. 4. Connect the other end to the PC audio output jack. 5. You had better set the PC’s resolution at 1024*768; and the refresh frequency must at 60Hz. After connection, press the SOURCE button and select VGA mode. - 19 - System Connections(Continued) Connecting to TV Signal Input This unit can be connected to the TV signal input source via the 75Q antenna jack on the rear panel. After connection, turn on the power of the unit and press the SOURCE button and select TV mode. TV SIG...