Votes - 3, Average rating: 4
(
)
)
|
manual abstract
For further information, please contact the store where you purchased your display. Do not install or modify the product other than specified. Do not use this stand for a Pioneer television other than those designated and do not modify it or use it for other purposes. Improper installation is extremely dangerous because it may result in it falling over or other accident. Installation Location • Select a location that is strong enough to support the weight of the stand and the displays. • Make sure to place it in a level and stable location. • Do not install it outdoors or in a wet place such as at a hot spring or near a beach. • Do not install the stand where it may be subjected to vibration or shock. Assembling and Installation • Assemble the stand in accordance with the assembly instructions and securely attach all screws at the designated locations. There have been cases where unforeseen accidents such as the equipment breaking or falling over occurred after the installation of the display because the stand was not installed as instructed. • The display must always be installed by two or more people to assure it is installed safely. • Before installation, turn off the power for the display and peripheral devices then remove the power cord plug from the power outlet. This product rotates 10° to the left and right and inclines approximately 2° forward and backward. Do not place objects within the range of rotation of this product and the Pioneer television. Install this product so that during routine use or when it is rotated, it does not protrude from the TV table or other location it has been installed. Failure to do so could cause unforeseen accidents such as the equipment breaking or falling over (see page 7). While adjusting its angle forward and backward, be extremely careful to keep your hands out of the space between the bottom of the Pioneer television and the stand (see page 6). Prevent accidents caused by the product falling over, by taking reliable measures to prevent it from falling over (see page 9). 2 En Checking the Enclosed Parts 3 En English Attaching the Pioneer Television A The weight of a 50 inch Pioneer television (without speaker) is about 34 kg (75 lbs), they have no depth, and are unstable. Therefore, Caution at least two people must assemble and install them. 3 Securing the Pioneer television with Installation screws ®. Attach the Pioneer television at the points marked with "T" using the enclosed hexagonal wrench. • Be sure to install it on a flat stable location. • Insert the screws in the holes vertically and do not tighten them with more force than necessary. • Make sure that you install the support columns reliably with reference to the procedure in "Assembling the Stand". Attachment Method 1 Attaching the Pioneer television to the stand. Fit the stand’s support columns to the bottom of the Pioneer television as indicated by the arrows, then slowly insert them vertically. Be extremely careful not to insert the support columns of the stand into any part of the Pioneer television other than the stand insertion slots. Note that doing so might damage the Pioneer television panel or its ports or result in the warping of the stand. N There have been cases where unforeseen accidents such as the equipment breaking or falling over occurred because the stand was installed with wrong screws. _J 4 Attaching the speakers. Refer to the operating instructions for the speaker for the installation method. (A Caution 2 Securing the Pioneer television with Installation screws ®. Secure them using the enclosed hexagonal wrench. 5 En English Forward/Backward Angle of Inclination Adjustment Mechanism On this stand, you can adjust the angle of inclination of the Pioneer television within a range of approximately 2° forward or backward according to your preference. • Be sure to adjust the angle only after you have attached the Pioneer television. • Be sure to install it on a flat table or other flat surface. • Be sure to hold the top of the Pioneer television with your hand while adjusting the angle. Adjustment Procedure 1 Loosen the forward/backward inclination anchor bolts using the enclosed C wrench (2 locations on the left and right). While being sure to hold the top of the Pioneer television with your hand, loosen the forward/backward inclination anchor bolts on the left and right sides by rotating them upwards using the enclosed C wrench. 3 Tighten the forward/backward inclination anchor bolts (2 locations on the left and right). Firmly tighten the forward/backward inclination anchor bolts on the left and right sides by rotating them downward using the enclosed C wrench. Be sure to hold the top of the Pioneer television with your hand until you have fully tightened the bolts. 4 Check once more to make sure that the forward/backward inclination anchor bolts are fully tightened. 2 Set the angle you prefer. Set the angle you prefer by slow...