Votes - 5, Average rating: 3.6
(
)
)
|
manual abstract
f. When the TV exhibits a distinct change in performance- this indicates a need for service. 20. Replacement Parts-When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21. Safety Check-Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition. 22. Heat-This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. OPERATING CONTROLS AND FUNCTIONS - FRONT PANEL - - REAR PANEL POWER CHANNELVOLUME MENU HEADPHONEL-AUDIO-R VIDEO 12345 678 - REMOTE CONTROL - AUDIO IN S-VIDEO ANT. IN 1716218 3. HEADPHONE jack- To connect headphone 11.INPUT SELECT button- Press to select (not supplied) for personal listening. TV or the external input (VIDEO1, VIDEO2) INSTALLING THE BATTERIES 1) Slide the battery compartment cover back 15 4. MENU button- Press to display the menu mode. on the remote unit. on the TV screen. (See USING AUDIO/VIDEO INPUT JACKS.) 14 2) Insert 2 "AA" penlight batteries into battery 7 5. VOLUME (VOL) ^/Ў buttons- Press to 12.CHANNEL RETURN button- Press this compartment in the direction as indicated 13 control the volume level. button to go back to the previously viewed by the polarity (+ / -) markings. Batteries channel. For example, pressing the CHAN- Press to determine the setting mode from the installed with incorrect polarity may dam- NEL RETURN button once will change 9 menu on the TV screen (only the VOL ^ age the remote unit. channel display from CH 3 (present chan 12 button). 3) Replace the cover. nel) to CH 10 (previously viewed channel), Press to select or adjust from a particular and pressing it a second time will return menu (for example: Language Selection, from CH 10 to CH 3. 11 Channel Presetting, Closed Caption Selection, 13.DISPLAY button- Press to display the Picture Adjustment, V-CHIP Set Up). 6 channel number on the screen. If you press 6. CHANNEL (CH) ^/Ў buttons-Press to it again, the channel number will disappear. 5 select memorized channel. 14.SLEEP button- Press the SLEEP button to Press to select the setting mode from the USING AUDIO/VIDEO INPUT JACKS display the sleep timer and start the func-When you use the AUDIO/VIDEO input 10 menu on the TV screen. tion. The shut off time can be determined jacks, select “VIDEO1” or “VIDEO2” mode Press to select item you want to adjust in by the number of times you press the but-by pressing the INPUT SELECT button on the 4 the picture control mode. ton (0, 10, 20, 30,..90, 0 minutes). remote control. 7. POWER button- Press to turn the TV ON 15.GAME button- Press to set the Game •To use the jacks on the back of the TV, and OFF. mode. Press the GAME button again to exit select “VIDEO1”. 8. Infrared Sensor Window- Receives the this mode. •To use the jacks on the front of the TV, infrared control signals from the remote (See USING AUDIO/VIDEO INPUT JACKS select “VIDEO2”. control unit. and PICTURE ADJUSTMENT.) Notes : 9. CHANNEL NUMBER buttons- Press two 16.S-VIDEO INPUT jack-Connect to the S-•You may also set the Game mode and digits to directly access the desired channel. VIDEO output jack of a video camera or VIDEO2 at the same time by pressing the Remember to press a "0" before a single VCR using the S-VIDEO cable (not sup-GAME button on the remote control. 1. VIDEO (IN) jack- Connect to the video digit channel. plied). "GAME" appears on the TV screen. In this output jack of a video camera or VCR. +100 button- Press to select cable channels 17.ANT(enna). IN jack- Connect to an anten-case, connect the external source to the 2. AUDIO (INPUT) L/R jacks- Connect to higher than 99. na, cable system, or satellite system. AUDIO/VIDEO jacks on the front panel. the left/right channel audio output jacks of 10.MUTE button- Press the MUTE button to 18.AC cord- Connect to a standard AC outlet (See PICTURE ADJUSTMENT) a video camera or VCR. turn off the sound portion of the TV pro-(120V/60Hz). Note : The AUDIO (INPUT) L jack is for gram (Volume level display turns LIGHT Note : Unwrap the AC cord completely mono input. The sound is heard from both RED from LIGHT BLUE). from the backcover before plugging the speakers. Use this jack for monaural audio Press the MUTE button again or press the cord into an AC outlet. equipment to be hooked up. VOL(ume) ^ or Ў button to restore sound. POWER 1 2 3 4 5 6 7 8 9 0 +100 DISPLAY VOL CH CH VOL SLEEP CHANNEL RETURN MUTE MENU GAME INPUT SELECT PREPARATION FOR USE 3) Press the VOL(ume) ^ button so that "ADD/DELETE" is selected. 4) Use the CH(annel) ^ or Ў button to select the channel you wish to put into memory or to erase from memory. Note : The display will disappear automatically in about 10...