Votes - 4, Average rating: 3.3
(
)
)
|
manual abstract
At first, read through the different closed caption options below left. Closed Caption Modes From which to Choose Caption Mode: CAPTION C1 or C2 A narration of selected TV programs will be displayed on the screen. Check your TV program listings for C.C. {Closed Caption) broadcasts. Caption Mode: TEXT C1 or C2 The lower half of the screen will be blocked out. When the TV station broadcasts text, such as program listings, special information, etc., it will appear in this space. Caption Mode: OFF Narration will not appear on the screen even if a closed caption or text broadcast is received. Note: The closed caption or text signal may be broadcast over C1, C2, or both. Also, text contents can vary so you may wish to try different settings. Recording and Playing Back a Closed Caption/Text Program Record: Your Combination VCR will automatically record the Closed Caption/Text signal. Just follow normal recording operation. Playback: To display the Closed Caption narration or Text during playback, follow steps 1 ~3 in the above section, and then select the desired caption mode in step 4. 14 1 Press ACTION* to display the MAIN MENU. 2 Press AT^ to select “TV,” and then press ACTION to display the SET UP TV screen. 3 Press AT to select “CAPTION,” and then press ^ to display the CAPTION screen. MAIN MENU H ...... SET UP TV ...... INPUT SELECT VIDEO ADJUST SELECT:* ▼ KEY SET :► KEY END :ACTION KEY Press AT to select “CAPTION MODE,” and then press ► repeatedly to select the desired caption mode. (See “Caption Mode description" below left). [.......CAPTION El ■CAPTION MODE CAP CiB CC ON MUTE CAP Cl SELECT : * T KEY SET :► KEY END :ACT I ON KEY Each press ► will change the display as shown at right. ►OFF TEXT C2 *-CAP C2 CAP C1 TEXT Cl 5 Press ACTION three times to exit the caption mode and return to the normal screen. Caption On Mute Feature This feature allows you to turn off the sound and, at the same time, display Closed Caption narration. Perfect for when you need silence, but would like to continue watching the program. 3 Follow steps 1-3 in the above section. b In step 4, press ► to select “OFF.” C Press AT to select “CC ON MUTE,” and then press ► repeatedly to select the desired caption on mute mode. • Each press of ► will change the display as shown at right. • The caption may be broadcast over CAP C1 or C2. .......CAPTION...... CAPTION MODE : OFF .......CAPTION....... SELECT:* » KEY SET :► KEY END :ACTION KEY CNO—►CAPCI-v —CAP C2*-/ d Press ACTION three times to return to the normal screen. G Press MUTE to mute the sound. The closed caption narration (if available) is displayed on the screen. • Press MUTE again to resume normal sound and picture. fvV FM Radio The Combination VCR has an FM radio with built-in antenna, 9 station preset, and a band range of 87.5-108.1 MHz. You can even set the On-Timer (page 13) to wake up to your favorite music station. |\^Check list before you begin. □ Alt connections are made (see page 5). Q Your Combination VCR is plugged in. Model PV-M2058 unit is shown here. 1 DISPLAY ADD/ DELETE AUDIO' Model PV-M2058 remote is shown here. FM Radio Feature Setup FM 1 87. 5MHz FM 1 87. 7MHz MEMORY:PUSH ADD/DLT KEY FM 1 87. 7MHz a Press FM/TV on the remote control or Combination VCR to select FM Radio mode. b In FM Radio mode, press a NUMBERED key (1-9). c Press AT to select the desired radio station. (Each press changes the frequency by 200 KHz.) Quick Station Scan ~ Hold down A or T for more than one second, and then release. The Combination VCR automatically advances the frequency 200KHz at a time. When nearing the desired station, press A or T to select the station. d Press ADD/DLT to memorize the desired station. • To preset other stations, repeat steps b~d. To Make Corrections, press the NUMBERED key to select the memorized number, and then repeat steps b~d to change the memorized station. Using the FM Radio 1 Press FM/TV on the remote control or Combination VCR to select FM Radio mode. 12:00PM FM 1 87. 5MHz £ Press a NUMBERED key (1-9) to select a preset station (see steps a~d above). Note; Once stations are preset, the selected station and current time will be displayed when FM/TV is pressed ON. After 10 seconds the station disappears. To remove the time, press DISPLAY. If DISPLAY is pressed while the station is still on screen or there is no display, the Combination VCR status screen appears. To cancel FM Radio mode, press FM/TV again to return to the normal screen. To Select Audio Mode for FM Radio
Tape Players - PVM2048 (1.46 mb)
Televisions - OMNIVISION VHS PV-M2058 (1.46 mb)