Manafacture: Panasonic File size: 2.6 mb File name: PVM2767.pdf Language of manual:

Free link for this manual available at the bottom of the page

However, it will not operate all cable Boxes made by these manufactures. If you get no results, your particular product brand cannot be controlled by this remote. CATV MAIN О © © © © © © © < © éfm — FM/TV (ENTER) Universal Remote Control Setup Find your cable box brand code number from the chart at left. CATV and Ö © © © © © 0 © 0 @_0j0 While holding down CATV, use the NUMBERED keys to enter your cable box brand code number. For code numbers 100 or greater, first push the 100 key. Then, enter the remaining digits. Try each of the functions. • Due to changes in infra-red commands used by some manufactures, some Cable Box brands are listed more than once. If your Cable Box does not respond to the first code, please try entering the next code. Using the Universal Remote Control Once the remote control has been properly setup, you can select MAIN, or CATV mode depending on which functions you wish to control. (See below.) MAIN or CATV Push MAIN or CATV on the remote control to select the desired mode. (See below for a list of controllable functions for each mode.) Set to MAIN: • All TV and VCR functions NOTES: Set to CATV: • Cable box Power • Numbered keys • Channel Up/Down Basic VCR functions, e.g. PLAY, REC, etc. FM/TV (ENTER) In CATV mode, it maybe necessary to push FM/TV (ENTER) after pushing the NUMBERED keys for channel selection. In CATV mode, ADD/DLT, MENU, PROG, ON-TIMER, R-TUNE and FM/TV are not available. Push MAIN to use these functions. Depending on your cable box brand, some of the functions listed may not be remote controllable. 25 More you Can Do fäF V CR Plus+ Setup Easy Taping. VCR Plus+ programming allows you to set most items of a timer recording by simply entering a special code (PlusCode) found in TV GUIDE magazine as well as the TV listings in selected newspapers. In order for your Combination VCR to do a VCR Plus+ recording, or a timer recording of cable stations, some setup is required. At first, choose your Connection Type. {Then, follow the instructions under the diagram.) Connection Type A cCABLE BOX -*• COMBINATION VCR> va I Back of Combination VCR Cable Box RF Coaxial Cable (not supplied) Cable/ Antenna Front of Combination VCR ^ VIDEO IN AU DIO IN-R If your system looks like this, do the following. 1. Complete the “Cable Box Setup” section at right. 2. Skip page 27 and go directly to page 28 for VCR Plus* Programming. Connection Type B COMBINATION VCR> Back of Combination VCR From Antenna or Cable Cable/ Antenna RF Coaxial Cable (not supplied) If your system looks like this, do the following. 1. Skip the “Cable Box Setup” section at right and turn to page 27. 2. Complete the “VCR Plus* Channel Setup" section on page 27. 3. Turn to page 28 for VCR Plus+ Programming. VCR Plus+ and PlusCode are trademarks of Gemstar Development Corporation. The VCR Plus+ system is manufactured under license from Gemstar Development Corporation. Cable Box Setup For Connection Type A (see left) only ] Push MENU to ; display the MAIN MENU. Push A V<>to select “CH,” and then push MENU to display the SET UP CHANNEL screen. MAIN MENU ¡□I I Eis] I TV to set. f --- SET UP CHANNEL --- | ANTENNA SYSTEM : I AUTO SET CATV ■CABLE BOX SET UP VCR PIus+ CH SET UP SELECT :* ▼ KEY SET :► KEY END :MENU KEY ARE YOU US I NG A CABLE BOX? YES isa Push A Vto select “YES” or “NO,” and then pushOto set. Select YES if all channels are received via the cable box I connection “A” at left). Then, go to step 5. Select NO if your cable connection “B” at left SELECT SET END :* ▼ KEY :► KEY :MENU KEY Push MENU to exit and turn to page 27. Push A V to select Cable box output channel number, and then push (>to enter. If necessary, refer to your cable box manual. If you are using Audio/Video jack connection for your cable box, select and set “VIDEO OUT’ as the output channel. ENTER CABLE BOX OUTPUT CHANNEL EH SELECT SET A T KEY ► KEY YOUR TV IS RECEIVING THE OUTPUT OF CABLE BOX CH 01 This display appears for 5 seconds. (Channel shown is example only) Push MENU to exit this mode and then, push A V <3 E> to select “EXIT.” Now, push MENU to exit from the MAIN MENU. Go directly to VCR Plus+ Programming on page 28. 26 In order for the Combination VCR to read the VCR Plus+ code, some setup is required. A Guide (VCR Plus+) channel number is assigned to each local broadcast and cable station. Because this number sometimes differs from the channel your TV receives the station on, it is necessary to program the Combination VCR with local channel information. VCR Plus+ Channel Setup For Connection Type B (page 26) only • Before you begin, complete the Channel Setup Preparations below left. Important Note: If your Combination VCR Connection type changes, from Type A to B, repe...

Other models in this manual:
Tape Players - PVM2767 (2.6 mb)

Download now

Please, enter two numbers from picture: