Votes - 3, Average rating: 3.3 ( )

Manafacture: Philips File size: 375.11 kb File name: sdv7120_27_dfu_aen.pdf Language of manual:

The packaging of this product is intended to be recycled. Contact your local authorities for information about how to recycle the packaging. When this logo is attached to a product, it means a financial contribution has been paid to the associated national recovery and recycling system. © 2011 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 4 EN 2 Your SDV7120 Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at com/welcome. Overview 1 UHF log periodic antenna 2 VHF dipoles 3 UHF/VHF gain control switch 4 Power switch with LED indicator 5 9V DC power connection 6 Coaxial cable (for TV connection) 7 120V AC/9V DC power adaptor (included) 8 Antenna base with female connector 9 UHF log periodic antenna with male connector 2 3468 English EN 5 2 Connect the other end of the built-in 3 Get started coaxial cable to the input on the TV receiver. To ensure the antenna to work properly, read the user manual of your television before you start. Set the television so that it receives the signal from an ANTENNA instead of CABLE or SATELLITE. Installation Determine the signal strength Before Installation, determine the best location for optimum reception. It is important for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter. Note • Choose a location near a window which gives the antenna a clear view of the transmitter. Note • Place the antenna away from the metal surface to avoid interference. Connect to the TV 1 Assemble the antenna base to the UHF log periodic antenna. 3 Connect the DC plug to the antenna and the power supply to a 120V AC outlet. 4 Turn the power switch on. The blue LED is lit. » 6 EN Note 4 Set up SDV7120 • It is possible to switch the gain control level down for best reception. For VHF/FM reception English Note 1 To turn the amplifier up, switch the gain control towards the max level. • To check the distance from the local TV broadcast transmitters to your location, visit org for more information. For UHF reception 1 Turn the TV to the desired channel/ station. 2 To turn the amplifier up, switch the gain control towards the max level. 2Extend the VHF dipoles to the longest possible length. 3Turn the TV or FM radio to the desired channel/station. Move the VHF dipoles in different directions up and down until the reception is achieved. 3Tilt or swivel the UHF log periodic antenna towards the transmitter until the reception is achieved. EN 7 Note • It is possible to switch the gain control level down for best reception. Note • The UHF log periodic element only allows 90 degrees rotation. Set up a digital tuner with this antenna You can install available channels with the digital TV tuner.This automatic process is part of the setup of the tuner. Ensure the antenna has set up properly before the tuner can receive viewable channels. There are two ways to connect the antenna to the TV: • Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically . • Connect the antenna directly to the TV. Tune to the analogue channels and find the best antenna location. Then re connect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner. 5 Frequently asked questions Can this antenna work with Analogue transmissions? Yes, this antenna can receive analogue television broadcasts in the UHF and VHF bandwidths. Can this antenna receive digital or work with ATSC broadcasts? Yes, this antenna is designed to receive ATSC and HDTV broadcasts in the UHF & VHF bandwidths. Can the antenna be powered by a DC power supply in a boat, RV or camper? Yes, there is a DC power socket located at the back of the antenna. Plug your cable/adapter into the antenna and then into your power source. Where should I place the antenna in order to get the best reception possible? Choose a location near a window which gives the antenna a clear view of the transmitter. Note • For best reception, place the antenna away from the metal surface to avoid interference. How do I know how much gain (amplification) is required to receive a clear picture? Once you have the VHF dipoles extended to the longest length, turn on the amplifier. Turn the amplifier up to the max position and then reduce as needed. In some case, you need to turn the amplifier down to receive a clearer picture. Can I set up this antenna with a digital tuner? Yes, this antenna can be set up with a digital tuner. (see ‘Set up a digital tuner with this antenna’ on page 9) 8 EN 6 Warranty and Service Limited One-Year Warranty Philips warrants that this prod...

Download now

Please, enter two numbers from picture: