Votes - 3, Average rating: 3
(
)
)
|
manual abstract
2 Select channel 3 Menu Turns the on-screen display (OSD) menus on and off. 4 Adjust volume Volume up (VOL+): Increases the volume. Volume down (VOL–): Decreases the volume. 5 Power Turns the TV on and off. 6 Power LED Green LED indicates power on. 7 Signal sensor Point the remote control at this sensor. 8 Headphone line out Connects to headphones. 9 Speakers Output audio content. Input and Output Ports 1 2 3 4 AV2 R AV1 L VIDEO DC-IN ANT AV2 R AV1 L VIDEO DC-IN ANT Description Function 1 AV2 Use the included 4-in-1 Audio/Video cable to connect external devices, such as a VCR, VCD, or DVD player. Audio Input: AV connectors white and red audio cables. Video Input: AV connector video (yellow) or S-Video cables. 2 AV1 Use the AV1 input to connect an external device, such as a VCR, or a VCD, or DVD player. Audio Input: AV connector white and red audio cables. Video Input: AV connector video (yellow) cable. 3 DC-IN Connects to the included power adapter. 4 Antenna/cable TV line in Connects to an antenna or CATV cable television line. Connecting to an Antenna or Cable TV 1 Connect one end of the VHF/UHF (Antenna) or CATV cable to the ANT Jack (VHF/UHF IN Jack) on the back of the TV. 2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to the Antenna or CATV socket. AV2 R AV1 L VIDEO DC-IN ANT AV2 R AV1 L VIDEO DC-IN ANT Antenna/CATV socket Antenna ANT jack (VHF/UHF IN jack) Antenna/CATV coaxial cable Note Connecting to AV Devices Connecting to a VCR, VCD or DVD Player Connecting to a Video Camera Connecting Headphones Notes Connecting the Power Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power adapter connector into the DC-IN on the rear panel of the TV. 3 Plug the three-pronged plug at the other end of the power cord into a power outlet. AV2 R AV1 L VIDEO DC-IN ANT AV2 R AV1 L VIDEO DC-IN ANT Power cord DC-IN Power outlet Power adapter Three-pronged plug Using the Remote Control Turning the TV On and Off 1 SOURCE CH MENU VOL CH 33 Power button /Power LED Press the POWER button on the remote control or on the TV control panel. The power LED indicator on the front of the TV changes from red to green, indicating that the power is on. 2 Press the POWER button again. The power LED changes from green to red, indicating that the TV is in standby (off) mode. Selecting Channels 1 SOURCE CH MENU VOL CH 33 Channel up Channel down Press the CH UP button to increase the channel number by one. 2 Press the CH DOWN button to decrease the channel number by one. 3 Enter the specific channel number by pressing the number buttons on the remote control. The channel is displayed on the LCD panel. Switching Source Signals Note Adjusting the Volume 1 SOURCE CH MENU VOL MUTE Volume up Volume down Press the VOL UP button to increase the volume. 2 Press the VOL DOWN button to decrease the volume. 3 Press the MUTE button. The word “MUTE” appears on the top right corner of the screen and sound is turned off. 4 Press the MUTE button again to restore the original volume. Note Press the menu button to exit the OSD menus and submenus at any time. Repeatedly press the MENU button to exit the OSD menus and submenus and return to TV mode. Note You can operate the OSD with either the remote control or the front panel control. SEL PRESET COLOR HUE SHARPNESS CONTRAST BRIGHTNESS PICTURE MENU 0 0 0 0 NEUTRAL 30 SATURATION ENTER MENU 1 Press the VOL UP button. The brightness slide bar appears. BRIGHTNESS BRIGHTNESS +12 -12 2 Press the VOL UP button to increase the brightness. 3 Press the VOL DOWN button to decrease the brightness. 4 Press MENU to confirm the setting and return to the Picture Menu. Note The new setting is confirmed automatically when the OSD times out. MAX MID MIN BRIGHTNESS +12 0 -12 Brightness Contrast SEL PRESET HUE SHARPNESS CONTRAST BRIGHTNESS PICTURE MENU 0 0 0 0 30 SATURATION ENTER MENU COLOR NEUTRAL 1 Press the CH DOWN button to select CONTRAST. 2 Press the VOL UP button. The contrast slide bar appears. CONTRAST CONTRAST 30 15 3 Press the VOL UP button to increase the contrast. 4 Press the VOL DOWN button to decrease the contrast. 5 Press MENU to confirm the setting and return to the Picture Menu. Note The new setting is confirmed automatically when the OSD times out. MAX MID MIN CONTRAST 30 15 1 Sharpness 1 Press the CH DOWN button to select SHARPNESS. 2 Press the VOL UP button. The sharpness slide bar appears. 3 Press the VOL UP button to increase the sharpness. 4 Press the VOL DOWN button to decrease the sharpness. 5 Press MENU to confirm the setting and return to the Picture Menu. Note The new setting is confirmed automatically when the OSD times out. MAX MID MIN SHARPNESS +8 0 -8 Hue SEL PRESET HUE SHARPNESS CONTRAST BRIGHTNESS PICTURE MENU 0 0 0 0 30 SATURATION ENTER MENU COLOR NEUTRAL 1 Press the CH DOWN button to select HUE. 2 Press the VOL UP button. The hue slide bar appears. HUE HUE +24 -24 3 Press the VOL UP button to increase the hue toward the green end of the spectrum....