The image is magnified by degrees. Compress function To compress the image size, press D.ZOOM t button or RIGHT CLICK button. The size of image is reduced by degrees. To pan the image, press POINT UP/DOWN/LEFT/RIGHT buttons. Panning function can worfc only when the image is larger than the screen size. To cancel Digital Zoom mode, press the any buttons except D.ZOOM A/T, SELECT, RIGHT CLICK, POINT PAGE A/'T. AUTO IMAGE, or LASER button. To adjust the Wnte Protect Area Affix Write Protect Sticker onto Write Protect Area to prevent from accidental erasure. Index Area Affix Index Label onto Index Area. • Do not bend it. drop it, subject it to strong forces or shocks or place where strong static electrical charge can be generated. • Do not insert matenais other than SmartMedia. The adapter may be damaged. Store PC Card Adapter mside its protective case when it is not used. • Do not shake the adapter, turn off the appliances, or remove SmartMedia from the PC Card Adapter dunng writing or reading data. It may damage the data in SmartMedia. Operating voltage : 5 V DC Usage environment Temperature : 0-55 ЯС (during use) -20-65 °C (dunng storage) Humidity : less than 95% (during use. during storago) This aoapter can be adapted to only our SmartMeaia indicated below. Available SmartMedia ; 3.3V / 5V, 2MB / 4MB / 8MB116MB 39 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING l£‘»i and press the SELECT button. Another dialog box SETTING Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the tem that you want to set, and then press the SELECT button to set it "On" or "Or, Blue back Display Ceiling Split wipe Lamp ago When this function is in the "On* position, this proiector will produce a blue image instead of the video noise on the screen when all the input source is unplugged or turned off. When this function is in the "On" position, the On-Screen Displays always appear when adjustments are made. (The following displays disappear by switching this function "...
