Votes - 4, Average rating: 4.3
(
)
)
|
manual abstract
If something seems strange, unplug the television and seek guidance from the dealer where you purchased the device. The television contains a lot of sensitive electronic components, which you could damage or break If you open the television or attempt to repair it. 2. Do not expose the television to high levels of moisture, dust, steam, oil, smoke, direct sunlight and etc. 3. Do not use solvents or other chemical reagents. Wipe the television with a soft cloth if It gets dirty. 4. Do not leave the television In extremely hot or cold places. The allowable temperature range for storage of the device is from -25 to +60"C. The allowable operating temperature range is from 0 to +40"C. 5. Use only the adapters and power sources indicated in these Instructions. 6. Turn off the television as soon as you are finished watching It and disconnect the adapter from the AC outlet. 7. Do not throw the television or subject It to strong mechanical influence. Drivers of motor vehicles should no watch the television or attempt to adjust it while driving (for safety reasons). Remember that in some countries this is prohibited by law. The appearance of several light or dark dots on the screen does not mean that the television is broken; this is normal for liquid crystal technology. DESCRIPTION OF CONTROLS 1. Power On indicator 2. Remote control sensor 3. Volume down button 4. Volume up button 5. Channel up button 6. Channel down button 7. Menu button 8. TV/AV selector 9. Power On/Off button 10. Table stand 11. Antenna 12. External antenna jack 13. Audio Input jack 14. Video Input jack 15. Headphones jack 16. Power supply 12 V jack POWER SOURCES This television can operate on the following power sources: a) AC electrical power (connection though AC adapter); b) Cigarette lighter jack for 12 V negatively-grounded DC car power systems (connect through the cigarette lighter jack with a car that has a 12 V direct current negatively-grounded power system using the car adapter). 4 5010.qxd 14.06.05 10:24 Page 5 ENGLISH REMOTE CONTROL UNIT Note 1. When using the remote control unit aim it at the remote control sensor on the TV body 2. Do not expose the remote control unit to water, moisture, shock or falls. 3. When using the remote control unit, the interval between button pushes should be less than two seconds. 1. Channel search buttons (CH) To change to a higher number channel, press the CH-»- button. To change to a lower number channel, press the CH ▼ button. 2. Volume adjustment buttons (VOL) To Increase the volume, press VOL+ -»■ . To decrease the volume, press VOL-▼. 3. MUTE button If you want to turn off the sound, press this button. Press the button again to restore the sound. 4. Image MODE button Press the MODE button repeatedly to choose the desired Image mode: standard, soft, bright, light. 5. Numerical buttons Using these buttons you can choose from 255 channels (from 0- to 254). If the channel number consists of one digit, then use the 0-9 buttons. If the channel number consists of two digits, then first press the -/-- buttons until the symbol appears on the screen, after which use the 0-9 buttons to enter the desired channel number. If the channel number consists of three digits, then press the -/-- button twice - the " symbol should appear on the display, after which you can use the 0-9 buttons to enter the channel number. 6. Flip display in horizontal direction 7. Flip display in vertical direction 8. Image format button 16:9 - standard; 16:9 - enlarged; 4:3 - standard. 9. Previous channel button Press this button to return to the previous channel. 10. AUTO-search button Press and hold the AUTO button for several seconds and automatic channel searching will begin. 11. VIDEO mode button To choose Video or TV, press the VIDEO. 12. Calendar button (CALE) Press the CALE button. Use the CH -»■ /CH and VOL+ -»■ /VOL- buttons to set the current year and month. 13. Menu language selection button (LANG) Press the LANG button to choose the menu language: English, Italian, Spanish, Portugal, German, Arabic, Chinese or Russian. 14. Power off timer button (TIMER) Press the timer button repeatedly until the desired amount of minutes until power off is displayed on the screen; after the timer gets to zero, the television will automatically shut off. The maximum number of minutes Is -120. 15. Power on/off button (POWER) Use the POWER button to turn the television on/off. 16. Button for displaying the current channel number (CALL) To reveal the channel number on the screen, press the CALL button. 17. MENU button Press the menu button to choose one of the various menus: Picture, Option, Clock, System, Preset. 5 5010.qxd 14.06.05 10:24 Page 6 ENGLISH SETUP YOUR TV Press the Menu button to enter setup menu: PICTURE Adjust the image quality. Press the CH button to choose the mode: CONTRAST, BRIGHT, COLOR, SHARP. Then use the VOL+ and VOL- buttons to adjust the...