3. If the PC(or the sound card of the PC) has an analog audio output connector, connect the PC's audio output to AUDIO INPUT port located on the right side of RGB INPUT port. How To Use 1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60Hz. 2. Select HDMI1/DVI input source in main input option of SETUP menu.(Refer to P.23) TV/VIDEO button is also available for this purpose. 3. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. How to connect 1. Connect the PC to RGB INPUT port of this TV with a RGB cable. 2. If the PC(or the sound card of the PC) has an analog audio output connector, connect the PC's audio output to AUDIO INPUT port located on the right side of RGB INPUT port. How To Use 1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60 Hz. 2. Select RGB-PC input source in main input option of SETUP menu.(Refer to P.23) Once you select RGB-PC in main input option of SETUP menu, TV/VIDEO button is also available for this purpose. 3. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. Monitor Display Specifications (RGB-PC or HDMI1/DVI Mode) Resolution 640x350 640x480 800x600 1024x768 Horizontal Frequency(KHz) 31.468 31.469 37.861 37.500 35.156 37.879 48.077 46.875 48.363 56.476 60.023 Vertical Frequency(Hz) 70.09 59.94 72.80 75.00 56.25 60.31 72.18 75.00 60.00 70.06 75.02 RGB-PC Mode Only Owner’s Manual 15 16 DLP Projection TV Installation Send the TV’s audio to external audio equipment (stereo system) via the Digital Audio Output (Optical) port. How to connect 1. Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. 2. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. 3. Set the “ TV Speaker option - Off” in the AUDIO menu. Refer to page 26. See the external audio equipment instruction manual for operation. Caution: Do not look into the optical output port. Looking at the light may damage your vision. Diigiittall Audiio Outtputt C A B L E C A R D DVI HDMI PR PB Y COMPONENT INPUT2 INPUT1 DTV/DVD INPUT (L) (R) AUDIO DIGITAL AUDIO OPTICAL INPUT (COMPONENT2) DIGITAL AUDIO OPTICAL INPUT (DVI) DIGITAL AUDIO OPTICAL OUTPUT ANTENNA H D M I 1 UPGRADE PORT CABLE / D V I H D M I 2 Hook up Variable Audio Output, L-Audio-R to Amplifier system for Left/Right front speaker sound. How to connect 1. Locate the Variable Audio Out jacks on the back of your TV and the Input jacks on the back of your stereo's amplifier. 2. Connect the two jacks, making sure that the right and left channels are connected correctly. 3. Set up your speakers through your analog stereo amplifier, according to the instructions provided with the amplifier. Extterrnall Stterreo S-VIDEO MONO RGB INPUT RGB/DVI INPUT (L) (R) AUDIO (L) (R) AUDIO MONITOR OUT INPUT2 INPUT1 VARIABLE AUDIO OUT PC/DTV (XGA/ 480p/ 720p/ 1080i) Installation HDMIHDMI -HDMITM, the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing. -This TV can receive the High-Definition Multimedia Interface(HDMI) or the Digital Visual Interface(DVI). -This TV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for 720x480p, 1280x720p, and 1920x1080i resolutions. -When you connect this TV with a source device(DVD player, Set Top Box or PC) supporting Auto HDMI/DVI function, the output resolution of the source device will be automatically set to 1280x720p. -If the source device does not support Auto HDMI/DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the DVD Player or Set Top Box's output resolution to 1280x720p, and the PC graphics card's output resolution to 1024x768, 60Hz. -If the source device has an HDMI output, no other audio connection is necessary because HDMI-to-HDMI connection includes both video and audio. -If the source device has a DVI output and no HDMI output, a separated audio connection is necessary. How To Connect 1. Connect the source device to HDMI1/DVI or HDMI2 port of this TV with an HDMI cable(not supplied with this pr...
