Votes - 4, Average rating: 4.3
(
)
)
|
manual abstract
(Press SOURCE/-B button to select TV mode) 1. Press the POWER/ (L) button to turn the LCD TV on. 2. Press the MENU/ ID button on the remote control to display the Main menu, and use the -4 / ► buttons to select the LOCK. 3. Use the T button to highlight the “Enter Password” item, use the numeric keys to input 4-digital password. After you that, the screen will display the junior menu. After settings, press MENU/ SD button to exit. NOTE: The factory password is 0000. 4-digital password The LOCK menu includes the following options : Change Password Defaul Use ▼ button to select the “Change Password” item, then press ► button to enter into the following menu. Input the new 4-digital password and input it again to confirm. System Lock Allows you to turn on or off the system lock. If you turn off the system lock, then the following items(US, Canada, RRT Setting and Reset RRT) will unable to use. 29 OSD OPERATION Channel menu options 1. Press ▲ and ▼ to select Program Edit in SETUP menu. 2. Press ▲ and ▼ to enter into the sub menu, a channel list will display. 3. Press ▲ and ▼ to select the channel in the list which you would like to see. 4. Press ► to perform your selection. 5. Press ▲ and ▼ to select the location you would like to place the channel. 6. Press < to perform you selection. 7. After completed, press MENU/ ® to return to the previous menu or press EXIT/ (gl to exit. The CHANNEL menu includes the following options : Air/Cable Allows you to select antenna between Air and Cable. If you select “Cable”, the following items(Favorite, Show/Hide, Channel NO., Channel Label and DTV Signal) are unable to use. Auto Scan Use T button to highlight the “Auto Scan” item, then press ► button to enter into the following menu. If you select “Air” as input signal in Antenna item, you can press ► button to search the channels automatically. The receivable channels will be stored automatically. When searching channels, press MENU/ ID to stop. 30 OSD OPERATION Channel menu options Favorite Allows you to add these channels which you desired as the favorite channels. Use T / ▲ button to highlight the “Favorite” item, then press ► button to enter into the following menu. Use T / ▲ button to highlight the desired item, then press ENTER button to add or remove the highlighted channel as favorite. Show / Hide Allows you to show or hide the channels. Use T / ▲ button to highlight the “Show / Hide” item, then press ► button to enter into the following menu. Use T / ▲ button to highlight the desired item, then press ENTER button to show or hide the highlighted channel. Channel No. Display the number of current channel. Channel Label Display the label of current channel. DTV Signal Display the quality of current DTV signal. 31 APPENDIX TROUBLESHOOTING The Symptom of Trouble Attempt the following steps to diagnose the symptom you have seen. If the symptom couldn’t be corrected, please contact the dealer. Symptom Possible causes Correct measures There are spots on the screen, and the sound is not clear when you watch TV. 1. The antenna cables may be disconnected. 2. The antenna cables may be disconnected or cankered. 3. The antenna cables may be weak. 4. The weather is bad. 5. The transmitter is wrong. 1. Connect antenna cables again or change the plug. 2. Connect antenna cables again or change new cables. 3. Adjust antenna again. 4. There is no need to correct. 5. Check with local operator. The picture is doubled or tripled, but sound is good. 1. The antenna cables may be weak. 2. The television could not tune correctly. 3. The weather is bad 4. The transmitter is wrong. 5. Television input incorrectly. 1. Adjust antenna again. 2. Search channels again or adjust television. 3. There is no need to correct. 4. Check with local operator. 5. Check the outside devices. Disturb Intermittent Your unit is being affected by other television, automobiles, fluorescent lamps, portable radio. Check the shield contains of television and put the television as far away as possible through cables. No picture & No sound 1. Television is under AV mode. 2. The picture and volume are set to minimum. 3. The television is under sleep mode or electricity-saving mode. 1. Check the picture/sound control (enter main menu). 2. Make sure power in on. ÈL NOTE : Consumer should not repair by yourself, high-voltage is in unit, please request professional worker to repair if meet trouble. 32 APPENDIX TROUBLESHOOTING Non-defect Judgment Attempt the following steps to diagnose the symptom you have seen. If the symptom couldn’t be corrected, please contact the dealer. Phenomena Check Parts The display monitor's panel goes hot. LCD TV takes inside lighten phosphor. It may increase the temperature of the screen in some occasions. It's not a defect. Unusual dots Black dots and Bright points may appear on the LCD screen. This is a structural property of the LCD panel and is not a defect. Stripes on screen ...
Great picture quality!