|
Other manuals for this model:
manual abstract
For service or repair, please contact a Samsung approved dealer. 1. Press the D.MENU button to display the DTV menu. 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button. 3. Press the ▲ or ▼ button to select "System", then press the ENTER/OK button. 4. Press the ENTER/OK button again, to select "Product Information". >■ The Product Information menu is selected. - Software Version, Firmware Version 5. Press the EXIT button to exit. English - 42 “Product Information“ © Software Version: T_BDXPDEU00_0700 Firmware Version: T_STDEU7_102c % © — 5 Return Checking the Signal Information © % Service: ? Service ID:0000 Multiplex: ? (TSID 0000, ONID 0000) Network: ? (ID 0000) 5 Return Software Upgrade Software Information 0 I % Manual Upgrade 0 Standby Mode upgrade : On 0 # ^Move EpEnter 5 Return - Software Upgrade Software Information 0 i Manual Upgrade 0 | % Standby Mode upgrade : On O # ^Move Banter 5 Return You can get information about the signal status. 1. Press the D.MENU button to display the DTV menu. 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button. 3. Press the ▲ or ▼ button to select "System", then press the ENTER/OK button. 4. Press the ▲ or ▼ button to select "Signal Information", then press the ENTER/OK button. 5. Press the EXIT button to exit. >- If the signal status is poor, the "No signal." message is displayed. Upgrading the Software To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You are given the option to install the upgrade. 1. Press the D.MENU button to display the DTV menu. 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button. 3. Press the ▲ or ▼ button to select "System", then press the ENTER/OK button. 4. Press the ▲ or ▼ button to select "Software Upgrade", then press the ENTER/OK button. 5. Press the ▲ or ▼ button to select "Software Infomation", "Manual Upgrade" or "Satandby Mode upgrade". Press the ENTER/OK button. ♦ Software Inforamtion Press the ENTER/OK button, then the current software version is shown. To display the software version information, press the ENTER/OK button again. ♦ Manual Upgrade Press the ENTER/OK button to search for new software from the currently broadcasting channels. ♦ Standby Mode Upgrade : On / Off Press the ENTER/OK button. To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is completed. 8. Press the EXIT button to exit. Software Upgrade“ Software Information > Manual Upgrade > à Standby Mode upgrade : On > 1 -i > ^Move B1 Enter ■D Return English - 43 Viewing Common Interface This contains information on CAM inserted in the CI slot and displays it. 1. Press the D.MENU button to display the DTV menu. 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button. 3. Press the ▲ or ▼ button to select "System", then press the ENTER/OK button. 4. Press the ▲ or ▼ button to select "Common Interface", then press the ENTER/OK button. 5. Press the ENTER/OK button to display the information for your application. 8. Press the EXIT button to exit. »• The Application Info inserting is about the CI CARD. *- You can install the CAM anytime whether the TV is ON or OFF. 1. Purchase the CI CAM module by visiting your nearest dealer or by phone. 2. Insert the CI CARD into the CAM in the direction of the arrow until it fits. 3. Insert the CAM with the CI CARD installed into the common interface slot. (Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.) 4. Check if you can see a picture on a scrambled signal channel. (-■ or\ .................i IT Selecting the CI (Common Interface) Menu This enables the user to select from the CAM-provided menu. 1. Press the D.MENU button to display the DTV menu. 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button. 3. Press the ▲ or ▼ button to select "System", then press the ENTER/OK button. 4. Press the ▲ or ▼ button to select "Common Interface", then press the ENTER/OK button. 5. Select to "CI Menu" by pressing the ▲ or ▼ button, and press the ENTER/OK button. 8. Select the required option by pressing the ▲ or ▼ button, and press the ENTER/OK button. 7. Press the EXIT button to exit. >• Select the CI Menu based on the menu PC Card. -CIMenu Main menu | Module information Smart card information Language Software Download Press OK to select, or Exit to quit OMove 01 Ent...
Other models in this manual:Televisions - LE37M86BD (12.61 mb)
Televisions - LE37M87BD (12.61 mb)
Televisions - LE40M86BD (12.61 mb)
Televisions - LE40M87BD (12.61 mb)