Votes - 4, Average rating: 5
(
)
)
|
manual abstract
©2008 Crestron Electronics, Inc. Contents Swivel Mount Kit for TPS-6X: SMK-6X 1 Introduction...............................................................................................................................1 Features and Functions................................................................................................1 Specifications..............................................................................................................1 Physical Description....................................................................................................2 Setup..........................................................................................................................................3 Supplied Hardware......................................................................................................3 Installation...................................................................................................................3 Resources...................................................................................................................................9 Industry Compliance...................................................................................................9 Further Inquiries..........................................................................................................9 Future Updates............................................................................................................9 Return and Warranty Policies..................................................................................................10 Merchandise Returns / Repair Service......................................................................10 CRESTRON Limited Warranty.................................................................................10 Swivel Mount Kit for TPS-6X: SMK-6X Introduction Features and Functions Specifications Specifications for the SMK-6X are listed in the following table. SMK-6X Specifications SPECIFICATION DETAILS Dimensions Height 2.64 in (6.69 cm) Width 6.09 in (15.45 cm) Depth 5.80 in (14.74 cm) Weight 0.96 lbs (0.44 kg) Text Box: · Designed for attachment to the TPS-6X-DS desktop docking station · Swivel mount increases security by reducing chance of theft while improving viewing convenience · Base rotates 330 degrees · Mounts on the desktop, in a lectern or on a conference table · Accommodates surface thickness from 3/4 inch (1.91 cm) minimum to 1 3/8 inches (3.50 cm) maximum, using the hardware provided · Cables route through center of assembly, keeping cables completely hidden from work surface · Customizable swivel range for added security and convenience Physical Description SMK-6X Overall Dimensions 5.80 in(14.74 cm) 6.09 in(15.45 cm) 0.39 in(0.99 cm) 0.44 in(1.11 cm) 2.64 in(6.69 cm) Setup Supplied Hardware The hardware supplied with the SMK-6X is listed in the following table. Supplied Hardware for the SMK-6X DESCRIPTION PART NUMBER QUANTITY Assembly, Swivel Stop Plate And Screw 4504353 1 Metal, Washer, Keyed, Swivel Stop 4506321 1 Cork/Rubber, Washer, Custom, Swivel 2017614 1 Rubber, Washer, Custom, Swivel 2017615 1 Screw, #08-32 x 3/8”, Steel 2007269 3 Screw, #08-32 x 1/8”, Steel 2017634 2 Washer, Flat, Steel, 7/8-A Narrow, 15/16” Inner Diameter, 1.75” Outer Diameter, 0.134” Thick 2017633 1 Nut, #7/8”-14, 1-15/16” Hex Diameter, 31/64”H, Steel, Zinc 2017632 1 Screw, #08-8B, 1/2”, Pan, Phil 2017784 6 Template, Overlay, Table Cutout 4504871 1 Installation To attach the SMK-6X Swivel Mount Kit to the TPS-6X-DS and install the assembly on a suitable mounting surface, refer to the following procedures. NOTE: The mounting surface thickness must be 3/4 inch (1.91 cm) minimum to 1 3/8 inches (3.50 cm) maximum using the hardware provided. Preparing the TPS-6X-DS 1. Remove the four screws on the TPS-6X-DS as shown in the first illustration on the following page. 2. Carefully remove the rear cover. 3. Slide the grommet out of the bottom of the rear cover and cut the grommet from the cable. 4. Slide the boot up the cable away from the connector as shown in the second illustration on the following page. 5. Feed the connector, then the boot and finally the full length of the cable through the bottom cutout in the base of the TPS-6X-DS. 6. Install the blank grommet provided with your TPS-6X-DS into place on the rear cover. 7. Replace the boot over the connector. 8. Replace the rear cover and the four screws removed in step 1. CAUTION: Use caution when cutting the grommet to prevent damage to the connecting cable. Damage to this cable can result in loss of functionality in the TPS-6X. Preparing the TPS-6X-DS (1 of 2) Remove These Screws Using a 1/16" Allen WrenchRemove These Phillips Head Screws Using a No.1 Phillips ScrewdriverRear CoverGrommetCable Preparing the TPS-6X-DS (2 of 2) Do Not RemoveRear CoverBlank GrommetBottom Cutout In BaseplateCableBootConnector SMK-6X/TPS-6X-DS Assembly 1. Feed the Connector/Boot and the...